Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 18029941
Caliper Assembly, Front

1990-2005 GM

Customer Questions & Expert Answers (8)
GM 18029941 Caliper Assembly, Front
  • Part Description
    Caliper, Front Brake; Brake Caliper
  • Position
    Front
  • Replaces
    18018316
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 1990 Pontiac Grand Am Caliper Assembly, Front Diagram for 18029941
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 18029941

  • Vehicle Fitment

    Year Make Model Trim Engine
    1990-1998 Buick SkylarkBase, Custom, Gran Sport, Limited, Luxury Edition, Olympic Gold Edition4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
    1992-1996 Chevrolet BerettaBase, GT, GTZ, Z264 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.1 L GAS
    1992-2005 Chevrolet CavalierBase, LS, LS Sport, RS, VL, Z244 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    1992-1996 Chevrolet CorsicaBase, LT, LTZ4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
    1992-1998 Oldsmobile AchievaS, SC, SCX, SL4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
    1990-1991 Oldsmobile Cutlass CalaisBase, GT, International, S, SL4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.3 L GAS
    1990-1998 Pontiac Grand AmGT, LE, SE, Value Leader4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L GAS
    1992-1994 Pontiac SunbirdGT, LE, LE Value Leader, SE4 Cyl 2.0 L GAS, 6 Cyl 3.1 L GAS
    1995-2005 Pontiac SunfireBase, GT, SE4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 18029941 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 18029941 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What Tools Are Required to Service and Repair Brake Calipers on Chevrolet Cavalier? Posted by Customer
    A:
    A caliper piston seal installer bearing the code j29077-a is essential for caliper brake repair work. Detach the brake caliper from the vehicle using tools and release the Brake Caliper Piston from the bore by passing weak compressed air through the fluid inlet hole. Utilize a small plastic or wooden item to take the piston dust boot seal out from the sealing recess of the caliper. Then remove and discard the piston seal from the caliper bore. Disconnect the caliper bleeder valve and its dust cap. Use denatured alcohol or equivalent to clean the Brake Caliper Piston bore seal counterbore and piston. Dry the parts using filtered non-lubricated air. Study the caliper opening for damages like cracks, scoring, away and rust presence. Light rust buildup can be brushed off with fine sandpaper while heavy damage demands a new part set. Check the caliper piston for cracks and assess any damage to chrome plating before replacing it with a new part. Apply delco supreme ii brake fluid (GM P/N 12377967) or its equivalent from a sealed clean container to the piston seal. Install the lubricated piston seal into the caliper bore before placing both the caliper piston and its dust boot seal. Install the new piston dust boot seal onto the piston then position the caliper piston seal installer tool j29077-a to press-fit the dust boot seal firmly. Reconnect the front brake caliper to its position by tightening its bleeder valve before installing a caliper cap properly.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be used to clean the brake caliper piston bore and seal counterbore for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Use denatured alcohol or an equivalent, and dry them with non-lubricated, filtered air.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be inspected on the caliper piston for the 2005 Chevrolet Cavalier? Posted by Customer
    A:
    Inspect the caliper piston for any damage and replace it if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be inspected in the bore and seal groove for the 2000 Chevrolet Cavalier? Posted by Customer
    A:
    Inspect the bore and seal groove for scoring, nicks, corrosion, and wear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you retain the rotor to the hub for the 2003 Chevrolet Cavalier? Posted by Customer
    A:
    Install and firmly hand tighten 2 wheel nuts to opposite wheel studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the procedure for reinstalling the wheel and tire for the 2002 Chevrolet Cavalier? Posted by Customer
    A:
    Remove the two wheel nuts securing the rotor to the hub and bearing assembly, install the wheel and tire assembly, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after installing the brake pads for the 2004 Chevrolet Cavalier? Posted by Customer
    A:
    Clean the brake pad mating surface on the steering knuckle, and apply a thin layer of high-temperature silicone brake lubricant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Caliper Assembly, Front 18029941 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 18029941 Caliper Assembly, Front is available in the market under the name GM Brake Caliper Repair Kit, Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 18029941 Caliper Assembly, Front fits certain Chevrolet Cavalier, Beretta, Corsica models, as well as Buick Skylark. Additionally, it is compatible with Pontiac Grand Am, Sunbird, Sunfire and Oldsmobile Achieva, Cutlass Calais models.
The original GM component designated by manufacturer part number 18029941 maintains top performance when functioning as the Caliper, Front Brake; Brake Caliper unit at its Front. The component 18029941 is constructed from durable material and its dimensions span 7.8 x 9.2 x 6.6 inches while weighing 7.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Caliper; Caliper, Wheel Brake Cylinder/Caliper. The part 18029941 has available replacement options 18018316. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.