Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 30025230
Side Molding, Outer Passenger Side

2001-2004 Chevrolet Tracker

Customer Questions & Expert Answers (5)
GM 30025230 Side Molding, Outer Passenger Side
  • Part Description
    Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
  • Position
    Outer Passenger Side
  • Manufacturer
    General Motors
Make sure this part fits
$142.20 MSRP: $212.59
You Save: $70.39 (34%)
Ships in 1-3 Business Days
1
ADD TO CART

  • 30025230 Side Molding, Outer Passenger Side is Ref No. 1 in the diagram below

    2003 Chevy Tracker Side Molding, Outer Passenger Side Diagram for 30025230
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 30025230

  • Vehicle Fitment

    Year Make Model Trim Engine
    2001-2004 Chevrolet TrackerBase, LT, ZR24 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 30025230 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 30025230 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace Rear Door Moldings on Chevrolet Tracker? Posted by Customer
    A:
    The process starts by assembling a Body Molding Removal Tool (J 41409) as part of the tool set to replace rear door body side moldings. Start with masking tape across the body side border to guard the molding from damage and enable correct alignment of rear side door molding to front side door molding while installing. You should avoid overheating this part. Warming of the rear side door and molding requires an auxiliary heat supply when the vehicle body temperature remains under 21°C (70°F). The Body Molding Removal Tool (J 41409) enables users to cut adhesive material and extract the molding from vehicles. Use a 50 percent isopropyl alcohol and 50 percent water solution to clean the rear side door area before completely drying it for molding installation. Place adhesive tape on the molding during application in an unrestricted dust environment to achieve optimum bonding. Continued cooling of the vehicle body to less than 21°C (70°F) requires additional warmth on the rear side door. After removal of the adhesive tape release sheet apply the molding to the rear side door by employing the masking tape as positioning tool. Use equal and controlled pressure along the length of the molding to achieve an even bond against the rear side door.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear side lower door moldings on LT on Chevrolet Tracker? Posted by Customer
    A:
    LT model rear side door lower moldings require release through seven plastic retainers attached by bottom-speaking initiation using taped flat bladed tools or taped trim tools. Separate the lower rear door molding from the vehicle and extract the 7 plastic retainers that secure the rear door area or the molding. Attach the 7 plastic retainers beginning from the bottom to the rear side door lower molding during the installation process. Replace any retainers which became damaged during removal. The final step requires you to install the rear side door lower molding back onto the rear door while pressing each plastic retainer into its proper place.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after removing the body hinge pillar trim panel for the 2003 Chevrolet Tracker? Posted by Customer
    A:
    Pull the front side door opening frame garnish molding from the pinch weld flange and remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Moldings
    Q:
    What is the next step after removing the old molding for the 2002 Chevrolet Tracker? Posted by Customer
    A:
    Install the new rear side door opening frame garnish molding to the pinch weld flange by pressing it into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Moldings
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Side Molding, Outer Passenger Side 30025230 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 30025230 Side Molding, Outer Passenger Side is available in the market under the name GM Door Moldings. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 30025230 Side Molding, Outer Passenger Side fits certain Chevrolet Tracker models.
The original GM component designated by manufacturer part number 30025230 maintains top performance when functioning as the Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings unit at its Outer Passenger Side. The component 30025230 is constructed from durable material and its dimensions span 32.4 x 15.2 x 3.5 inches while weighing 2.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 30025230 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.