Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19130255
Clutch

2006-2009 GM

Customer Questions & Expert Answers (5)
GM 19130255 Clutch
  • Part Description
    Clutch Kit, A/C; A/C Compressor Clutch
  • Replaces
    19130195, 19129811
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • 2006 Chevy Equinox Clutch Diagram for 19130255
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19130255

  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19130255
    Part DescriptionClutch Kit, A/C; A/C Compressor Clutch
    Other NamesClutch Kit, A/C Compressor Clutch
    Item Dimensions6.6 x 6.4 x 4.6 inches
    Item Weight8.00 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces19130195, 19129811
    ManufacturerGeneral Motors
    SKU19130255
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2009 Chevrolet EquinoxLS, LT, LTZ6 Cyl 3.4 L GAS
    2006-2009 Pontiac TorrentBase6 Cyl 3.4 L GAS

  • Customer Questions & Expert Answers

    Q:
    Is this 19130255 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19130255 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the A/C Clutch assembly on Chevrolet Equinox? Posted by Customer
    A:
    Vehicle technicians must begin the compressor clutch assembly replacement process by taking out the compressor unit. Use Universal Spanner Wrench (J 37872) to grip the compressor clutch before you remove the bolt connecting it to the compressor. The Clutch Remover tool (GE-47849) should be installed onto the compressor clutch before removing it from the compressor unit. Proceed to detach the compressor clutch shims off the shaft before you remove the snap ring from the pulley. Use the Center Puller (GE-47850) combined with Three Jaw Puller (J 25031-A) to disconnect the compressor pulley from the compressor. Start by removing both the clutch field coil connector bracket screw and clutch field coil screws before pulling out the clutch field coil from the compressor. Clean all surfaces of the clutch field coil and pulley mounting area prior to putting the clutch field coil back on the compressor. Use a torque wrench to fasten the clutch field coil screws at 4.9 Nm (43 lb in) and the clutch field coil connector bracket screw at 4.3 Nm (38 lb in). To install the compressor pulley you need to use the Armature Replacer (GE-47851) which should have the snap ring with rounded edge facing up. After installing the snap ring to the compressor pulley you must position the compressor clutch shims onto the compressor shaft. Install the compressor clutch on the compressor shaft before using the Armature Replacer (GE-47851) to fasten the compressor clutch to the compressor. Use a feeler gauge to check the clearance between the compressor clutch and pulley while ensuring it stays within the range of 0.3 mm to 0.6 mm (0.012 in to 0.024 in). Fitting new clutch bolts should be followed by tightening the compressor clutch with a Universal Spanner Wrench (J 37872) to 21 Nm (16 lb ft) torque capacity. Check that the compressor pulley easily rotates free of obstruction before reinstalling the compressor into the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How is the compressor clutch secured to the compressor for the 2006 Chevrolet Equinox? Posted by Customer
    A:
    Use the Armature Replacer (GE-47851) to secure the compressor clutch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    Q:
    Which tools are used to remove the compressor pulley for the 2008 Chevrolet Equinox? Posted by Customer
    A:
    Utilize the Center Puller (GE-47850) along with the Three Jaw Puller (J 25031-A).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    Q:
    What should be done after achieving the correct air gap for the 2007 Chevrolet Equinox? Posted by Customer
    A:
    Install the new clutch bolt and tighten it to 21 N.m (16 lb ft) while holding the compressor clutch with J 37872.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19130255, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19130255 Clutch. It is sometimes referred to as GM A/C Clutch. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19130255 Clutch. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery