Make sure this part fits

GM 91176896
Condenser

1999-2004 Chevrolet Tracker

Customer Questions & Expert Answers (4)
GM 91176896 Condenser
  • Part Description
    Condenser (On Esn); A/C Condenser
  • Replaces
    91175044
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number91176896
    Part DescriptionCondenser (On Esn); A/C Condenser
    Other NamesCondenser, A/C Condenser
    Item Dimensions37.1 x 20.5 x 11.4 inches
    Item Weight10.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces91175044
    ManufacturerGeneral Motors
    SKU91176896
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2004 Chevrolet TrackerBase, LSi, LT, ZR24 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
  • Customer Questions & Expert Answers

    Q:
    Hey, is 91176896 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 91176896 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to install a new A/C Condenser in a refrigeration system on Chevrolet Tracker? Posted by Customer
    A:
    A new condenser requires 20-30 ml (0.7-1.0 fl oz) of refrigerant oil added to the refrigeration system during installation. Begin with the process of recovering and draining the refrigerant. Start your installation by taking away the front grille and front bumper fascia and the two bumper fascia-brace retaining bolts. Seal the system's refrigerant ports to shield them from dirt and moisture intrusion. To work on the condenser start by taking out the 1 bolt then the condenser inlet tube followed by taking out the condenser outlet tube . The installation requires the removal of both the condenser fan electrical connector and the refrigerant pressure sensor electrical connector. Lower the condenser with its fan out of the vehicle by first removing its 4 mounting bolts. After removing the 4 mounting nuts you need to take out the condenser fan. When installing the condenser fan simply connect it to the condenser while tightening its position with the four nuts. To assemble the condenser insert the fan into position within the vehicle before tightening the 4 mounting bolts to 20 n.m (15 lb ft). Fit new lubricated o-rings made from mineral base 525 viscosity refrigerant oil into the condenser fittings before installing the condenser outlet tube and completing the fitting with a torque of 35 n.m (26 lb ft). Secure the condenser inlet tube with its bolt while applying 25 n.m (19 lb ft) of torque. First connect the power cables for the condenser fan system as well as for the refrigerant pressure sensor. Fasten the bumper fascia brace using two bolts before installing the front bumper fascia along with the front grille. The air conditioning system evacuation concludes with charging procedures before a complete a/c test with leak detection examinations.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done with the O-rings during installation for the 2000 Chevrolet Tracker? Posted by Customer
    A:
    Install new O-rings lubricated with mineral base 525 viscosity refrigerant oil to the condenser fittings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Condenser
    Q:
    What electrical connections need to be made for the 2003 Chevrolet Tracker? Posted by Customer
    A:
    Connect the condenser fan electrical connector and the refrigerant pressure sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Condenser
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 91176896, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 91176896 Condenser. It is sometimes referred to as GM A/C Condenser. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 91176896 Condenser. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery