Make sure this part fits

GM 89039661
Console Assembly

2000-2005 Chevrolet Impala

Customer Questions & Expert Answers (5)
GM 89039661 Console Assembly
  • Part Description
    Console, Floor Console; Center Console Base
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$53.24 MSRP: $359.30
You Save: $306.06 (86%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005, 2000-2003 Chevrolet ImpalaBase, LS, LS Sport, SS6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 89039661 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89039661 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front center console on Chevrolet Impala? Posted by Customer
    A:
    Begin floor console replacement by removing the trim plate followed by unbolting hardware situated below the instrument panel (IP) and at the transaxle shift control lever and under the mat in the rear bin. Pull the console toward you to free its holding clips from the instrument panel then disconnect any electrical wires before taking out the console. Place the front floor console inside the vehicle then start by connecting all necessary electrical connectors. Place the console so its clips get engaged at the instrument panel (IP) before you tighten the bolts around the ip and shift control lever at the transaxle and underneath the rear floor mat to 12 n.m (106 lb in). Complete your installation by putting on the trim plate to the front floor console.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace the Center Console on Chevrolet Impala? Posted by Customer
    A:
    You need to start your impala front floor console replacement by taking off the trim plate. Begin by removing three console bolts fixed to positions near the instrument panel (IP) and at the transaxle shift control lever and beneath the mat in the rear storage area. Reverse pull the console until it uncovers the clips from the ip and enable disconnection of electrical connectors. Before installation place the front floor console inside the vehicle then connect all electrical cables. Position the front floor console in its place before you secure the clips which need to fit against the ip. Secure the front floor console bolts to 12 nm (106 lb in) torque specification while installing them at the instrument panel (IP) and transaxle shift control lever and beneath the mat in the rear bin. Put the trim plate in position on the front floor console.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the bolts for the 2005 Chevrolet Impala? Posted by Customer
    A:
    Pull the console rearward to disengage the clips from the IP and disconnect the electrical connectors before removing the console.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Center Console
    Q:
    What is the first step for installation of the front floor console for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Position the front floor console in the vehicle and connect the electrical connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Center Console
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Console Assembly 89039661 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89039661 Console Assembly is available in the market under the name GM Center Console Base, Center Console. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89039661 Console Assembly fits certain Chevrolet Impala models.
The original GM component designated by manufacturer part number 89039661 maintains top performance when functioning as the Console, Floor Console; Center Console Base unit at its Front. The component 89039661 is constructed from durable material and its dimensions span 45.8 x 16.2 x 30.7 inches while weighing 10.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Console. The part 89039661 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.