GM 15929474
Console

Begin console replacement by moving the front seats to their rearmost position then accessing screws under the front seats that secure the lower console. Begin by removing the console screws before gently lifting the rear section of the center floor console to disconnect the electrical connector which powers the auxiliary power outlet. Move the center floor console to its back position to reveal upper console screws then remove the bolts that mount the console to the central stack before removing the floor console. To mount the console correctly you should position it using the mounting bracket first then tighten the console screws to 2.5 n.m (22 lb in). After plugging in the electrical connector to the auxiliary power outlet, move the Center Console into position then reach below the front seats to tighten the lower console screws to 2.5 n.m (22 lb in). Put the front seat in its usual spot.

A proper replacement of the console begins with moving the front seats to the rear position followed by accessing screws beneath the front seats. Start by removing the console screws before lifting the rear edge of the center floor console and disconnecting its auxiliary power outlet electrical connector. Reach behind the center floor console through its rearward sliding motion to access upper bolts then remove the console bolts which secure it to the center stack. Position the console with its mounting bracket first then install all console screws using a torque of 2.5 n.m (22 lb in). Reconnect the electrical connector to the auxiliary power outlet and put the Center Console back in place while installing lower screws with 2.5 n.m of torque (22 lb in). Position the front seat into its normal position.