Make sure this part fits

GM 24246918
Master Cylinder

2005-2010 GM

Customer Questions & Expert Answers (8)
GM 24246918 Master Cylinder
GM 24246918 Master Cylinder
  • Part Description
    Cylinder Assembly-Clutch Master; Clutch Master Cylinder
  • Replaces
    12582664
  • Manufacturer
    General Motors
Make sure this part fits
$128.28 MSRP: $201.84
You Save: $73.56 (37%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number24246918
    Part DescriptionCylinder Assembly-Clutch Master; Clutch Master Cylinder
    Other NamesCylinder, Hydraulic Clutch Main Cylinder
    Item Dimensions12.1 x 8.5 x 6.1 inches
    Item Weight0.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces12582664
    ManufacturerGeneral Motors
    SKU24246918
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2010 Chevrolet CobaltBase, LS, LT, LTZ, Sport, SS4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2007-2008 Pontiac G5Base, GT4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 24246918 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 24246918 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Clutch Master Cylinder (MU3) on Chevrolet Cobalt? Posted by Customer
    A:
    Start the replacement of the Clutch Master Cylinder (MU3) by removing the clutch pedal retainer from its position on the front of the clutch pedal assembly followed by pulling the clutch pedal upward to detach the Pushrod from the pedal. Next, remove the ubec. Cautions exist in relation to both paint damage and electrical component breakdowns from brake fluid exposure. Before disconnecting the Clutch Hose and clutch line from the master cylinder place a shop towel under the master cylinder to catch any violating fluid. Screw on protective caps to the reservoir and hydraulic lines before rotating the Clutch Master Cylinder one 1/4 turn clockwise and pulling it out from the vehicle. Start by positioning the Pushrod along the clutch pedal before you put in the Clutch Master Cylinder by turning it counterclockwise 1/4 turn. Remove caps from reservoir and hydraulic lines then attach the clutch line and Clutch Hose to the master cylinder along with reinstallation of the ubec. Solve the collection pipe to the clutch pedal afterward place the clutch pedal retainer then complete the bleeding procedure for the clutch's hydraulic system.
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the next steps after placing a towel under the cylinder for the 2010 Chevrolet Cobalt? Posted by Customer
    A:
    Disconnect the clutch hose and clutch line from the cylinder, cap the reservoir and hydraulic lines to prevent fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What is the next step after disconnecting the lines for the 2009 Chevrolet Cobalt? Posted by Customer
    A:
    Rotate the clutch master cylinder one 1/4 turn clockwise and remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What should be ensured during the installation of the new clutch master cylinder for the 2006 Chevrolet Cobalt? Posted by Customer
    A:
    Ensure the clutch master cylinder pushrod is aligned with the clutch pedal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What are the final steps to complete the replacement for the 2007 Chevrolet Cobalt? Posted by Customer
    A:
    Connect the pushrod to the clutch pedal, install the clutch pedal retainer, and finally bleed the clutch hydraulic system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What should be done after removing the clutch pedal for the 2008 Chevrolet Cobalt? Posted by Customer
    A:
    Remove the UBEC and place a shop towel under the clutch master cylinder to catch any fluid loss.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What should you do to prevent fluid loss and contamination for the 2005 Chevrolet Cobalt? Posted by Customer
    A:
    Cap the reservoir and hydraulic lines.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Clutch Master Cylinder
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 24246918, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 24246918 Master Cylinder. It is sometimes referred to as GM Clutch Master Cylinder. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 24246918 Master Cylinder. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery