Make sure this part fits

GM 15821966
Lock Cylinder, Front

1997-2008 GM

Customer Questions & Expert Answers (9)
GM 15821966 Lock Cylinder, Front
  • Part Description
    Cylinder Kit, Front Side Door Lock (Uncoded); Door Lock Cylinder
  • Position
    Front
  • Replaces
    12457617, 12531211
  • Manufacturer
    General Motors
Make sure this part fits
$17.19 MSRP: $25.59
You Save: $8.40 (33%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2007 Buick TerrazaCX, CXL6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2007-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2005 Pontiac MontanaBase6 Cyl 3.4 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15821966 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15821966 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the door lock cylinder on Chevrolet Venture? Posted by Customer
    A:
    The first step to replace the Door Lock Cylinder requires you to take out the front door outside handle. Placing your tools on the front door outside handle starts with removing the lock cylinder retainer followed by extracting the lock cylinder from the handle. Put the front Door Lock Cylinder inside the front door outside handle before attaching it with the lock cylinder retainer. Put back the front door outside handle after executing this procedure.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the door lock cylinder on Chevrolet Uplander? Posted by Customer
    A:
    Start the Door Lock Cylinder replacement by taking out the front door outside handle. First remove the retainer which serves to lock the cylinder and then take out the cylinder itself from the front door outside handle. The front Door Lock Cylinder goes into the front door outside handle before using the lock cylinder retainer for fitting. The last step includes reattaching the front door outside handle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after removing the lock cylinder retainer for the 2007 Buick Terraza? Posted by Customer
    A:
    Remove the front door lock cylinder from the front door outside handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Cylinder
    Q:
    What is the final step in the installation process for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Attach the lock rod to the latch, reinstall the liftgate handle molding, and put the liftgate trim panel back in place before closing the liftgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Cylinder
    Q:
    What should be done after installing the lock cylinder for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Attach the lock rod to the key cylinder and connect the electrical connector if applicable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Cylinder
    Q:
    What is the next step after disconnecting the electrical connector for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Detach the lock rod from the cylinder before removing the lock cylinder from the liftgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Cylinder
    Q:
    What should be done if the lock cylinder is equipped with an electrical connector for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Disconnect the electrical connector and the lock rod from the cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Cylinder
    Q:
    What is the first step to replace the door lock cylinder for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Remove the front door outside handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Cylinder
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock Cylinder, Front 15821966 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15821966 Lock Cylinder, Front is available in the market under the name GM Door Lock Cylinder. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15821966 Lock Cylinder, Front fits certain Chevrolet Uplander, Venture models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana, Trans Sport and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 15821966 maintains top performance when functioning as the Cylinder Kit, Front Side Door Lock (Uncoded); Door Lock Cylinder unit at its Front. The component 15821966 is constructed from durable material and its dimensions span 3.3 x 2.4 x 1.9 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Cylinder Kit, Door Lock Cylinder; Cylinder Kit, Door Outside Lock. The part 15821966 has available replacement options 12457617, 12531211. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.