Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 89060339
Control Module

2004-2007 GM

Customer Questions & Expert Answers (6)
GM 89060339 Control Module
  • Part Description
    Module Kit, Electronic Brake & Traction Control; ABS Control Module
  • Replaces
    89047798
  • Manufacturer
    General Motors
Make sure this part fits
$527.46 MSRP: $897.98
You Save: $370.52 (42%)
Ships in 1-2 Business Days
1
ADD TO CART
  • 2005 Cadillac CTS Control Module Diagram for 89060339
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 89060339

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Cadillac CTSBase, V6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2005-2006 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 89060339 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89060339 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the ABS Control Module on Cadillac SRX? Posted by Customer
    A:
    The first step to replace the ABS Control Module (ABSCM) requires turning the ignition OFF because this prevents equipment damage. You should support the vehicle before removing the air deflector shield and the right front wheelhouse liner. The washer solvent container stays in place without removal but its bracket should be detached. Apply thorough cleaning of the ABSCM area because dirtying the ABS components during disassembly endangers their operation. Use your fingers to push the connector retainer to unlock it. Then pull the connector tab forward to separate the ABSCM electrical connector which you should keep aside. Wash away the four ABSCM to brake pressure modulator valve (BPMV) screws and clean all ABSCM/BPMV surface areas. The repair of ABSCM is not possible so replace it when it fails by disconnecting the ABSCM component from the BPMV. Place the new ABSCM unit onto the BPMV with correct alignment of the internal pump motor connector. Then secure the installation by covering the BPMV seal surface. Embed the ABSCM to BPMV with new screws following a sequence of tightening from 1 to 4 until they reach 5 Nm (44 inch lbs.). Put the ABSCM electrical connector onto the ABSCM unit and push the connector tab to the back until it secures into position. The installation process includes putting back the washer solvent container bracket followed by the wheelhouse liner and air deflector shield. Then raise the vehicle. The scan tool will allow clearing of DTCs and performing an ABS Diagnostic System Check.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done with the EBCM and BPMV for the 2005 Cadillac CTS? Posted by Customer
    A:
    Separate the EBCM from the BPMV and clean the seal surface of the BPMV.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What should be done after reinstalling the front air deflector for the 2004 Cadillac CTS? Posted by Customer
    A:
    Lower the vehicle and connect the EBCM electrical connector, ensuring the tab is locked.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What is the next step after separating the EBCM from the BPMV for the 2007 Cadillac CTS? Posted by Customer
    A:
    Clean the seal surface of the BPMV and install the EBCM to the BPMV.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What should be done with the front air deflector for the 2006 Cadillac CTS? Posted by Customer
    A:
    Remove it and discard the 2 lower EBCM to BPMV screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Control Module 89060339 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89060339 Control Module is available in the market under the name GM ABS Control Module. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89060339 Control Module fits certain Cadillac CTS, SRX models.
The original GM component designated by manufacturer part number 89060339 maintains top performance when functioning as the Module Kit, Electronic Brake & Traction Control; ABS Control Module unit. The component 89060339 is constructed from durable material and its dimensions span 8.2 x 6.3 x 6.1 inches while weighing 2.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of ABS Control Unit; Module Kit, Electronic Brake Control. The part 89060339 has available replacement options 89047798. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.