Make sure this part fits

GM 15926160
Nameplate, Rear

2004-2012 GMC Canyon

Customer Questions & Expert Answers (11)
GM 15926160 Nameplate, Rear
  • Part Description
    Emblem, End Gate And Rear Door Decoration
  • Position
    Rear
  • Replaces
    15207240
  • Manufacturer
    General Motors
Make sure this part fits
$82.20 MSRP: $117.62
You Save: $35.42 (31%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15926160
    Part DescriptionEmblem, End Gate And Rear Door Decoration
    Other NamesPlate, End Gate And Rear Door Decoration
    Item Dimensions17.2 x 1.7 x 0.3 inches
    Item Weight0.30 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15207240
    ManufacturerGeneral Motors
    SKU15926160
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 GMC CanyonSLE, Z71 SLE, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15926160 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15926160 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done if the emblem/nameplate location is not marked for the 2009 GMC Canyon? Posted by Customer
    A:
    Apply tape and measure 251 mm (9.88 in) from the bottom of the door and 157 mm (6.18 in) from the front of the door to the front of the emblem/nameplate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What temperature should the door surface be warmed to for the 2008 GMC Canyon? Posted by Customer
    A:
    A minimum of 21°C (70°F).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the first step in the replacement process for the 2004 GMC Canyon? Posted by Customer
    A:
    Apply tape around the door emblem for protection and alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done after warming the tailgate surface for the 2005 GMC Canyon? Posted by Customer
    A:
    Remove the backing from the front end of the emblem/nameplate and press it onto the tailgate surface while continuing to remove the backing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the Heat Gun be used for the 2004 GMC Canyon? Posted by Customer
    A:
    Hold the Heat Gun (J 25070) 152 mm (6 in) from the surface and heat the emblem/nameplate in a circular motion for about 30 seconds.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What temperature should the door surface be warmed to for the 2007 GMC Canyon? Posted by Customer
    A:
    A minimum of 21°C (70°F).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done after applying the decal for the 2009 GMC Canyon? Posted by Customer
    A:
    Inspect the decal for bonding, remove the tape, and finally, reinstall the tail lamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How do you install the new emblem for the 2008 GMC Canyon? Posted by Customer
    A:
    Attach the emblem to the grille, ensuring to follow the Fastener Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should adhesive be eliminated from the door panel and emblem/nameplate for the 2010 GMC Canyon? Posted by Customer
    A:
    Use a 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501 or equivalent).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What temperature should the door surface be warmed to for the 2006 GMC Canyon? Posted by Customer
    A:
    Warm the door surface with the Heat Gun (J 25070) to a minimum of 21°C (70°F).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15926160, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15926160 Nameplate, Rear. It is sometimes referred to as GM Emblem. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15926160 Nameplate, Rear. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed GMC parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery