GM 22756999
Muffler & Pipe

A driver must first raise and support the vehicle before switching out the exhaust Muffler with nea, neb, or n10 components. Locate the Muffler.pipe nuts that attach to the three way Catalytic Converter. Install helpers for this task to remove the rubber insulation from exhaust underbody hangers (1, 2, and 3) before taking the Muffler assembly out of the vehicle and exhaust flexible pipe. Two helpers will assist with the Muffler assembly installation to both the vehicle and exhaust flexible pipe before installing the rubber insulators on exhaust underbody hangers (1, 2, 3). Position the three way Catalytic Converter into Muffler pipe nuts then tighten them to 50 nm (37 lb ft). Finally, lower the vehicle.

To change the exhaust Muffler on a vehicle with llt and 3.6l, one has to first raise and support the vehicle. Disconnect Muffler nuts and pull the three way Catalytic Converter. With the assistance, interchange the rubber insulators from the exhaust underbody hangers (1, 2, and 3), and after that, take away the Muffler outfit from the exhaust adaptable pipe and the vehicle. Position the Muffler assembly on the vehicle and the exhaust flexible pipe with assistance and install rubber insulators on the exhaust ugly body hangers (1, 2, 3). Next, fit the three way Catalytic Converter to the Muffler nuts and tighten these to 50 nm (37 lb ft), and finally, lower the vehicle.