GM 15290902
Muffler & Pipe

Attaining replacement of the exhaust Tail Pipe extension begins by supporting and elevating the vehicle. The exhaust system needs removal from both the rear suspension hanger rods and Tail Pipe hanger rods before the operation. First mark the exhaust tip position on the Exhaust Pipe before removing the weld from the exhaust tip top and bottom sections to detach the tip. Finish cleaning the welds still present on the Exhaust Pipe. Attach the new exhaust tip to the Exhaust Pipe while keeping it directly on the mark established during disassembly procedure. Reinstall the exhaust system to its positions on the rear suspension hanger rods and the Tail Pipe hanger rods while verifying that the exhaust tip remains well aligned with the vehicle body. After tacking the exhaust tip to the vehicle remove the exhaust system by taking it away from its mounting positions on both the rear suspension hanger rods and Tail Pipe hanger rods. Fix the new exhaust tip to the Exhaust Pipe at the same points as the first tip before reinstalling the exhaust system to the rear suspension hanger rods and the Tail Pipe hanger rods.

The replacement process for the exhaust Tail Pipe extension starts by lifting up and supporting the vehicle. Start by removing the exhaust system from both its positions at the rear suspension hanger rods and the Tail Pipe hanger rods. Use the tip marker to note the current location of the exhaust tip on the Exhaust Pipe before you remove top and bottom welds as well as the exhaust tip itself. Weld removal must take place on all remaining parts of the Exhaust Pipe. Install the new exhaust tip to the Exhaust Pipe using the same position as the original placement mark before disassembly. Re-attach the exhaust system to its positions on the rear suspension hanger rods followed by the Tail Pipe hanger rods with visual reference to the exhaust tip alignment on the vehicle. Weld the exhaust tip only in specific positions and remove the exhaust system from the rear suspension hanger rods and the Tail Pipe hanger rods. Finally you should weld the exhaust tip to the Exhaust Pipe at the same points where the original piece was welded before reinstalling the exhaust system to both rear suspension hanger rods and Tail Pipe hanger rods.