GM 12479754
Bumper Cover

The first step to replace front Bumper fascia air deflector is to raise the vehicle. The first step requires disconnecting fog lamp electricity if you have them before removing the fog lamps. A flat-bladed screwdriver should be used to disconnect the center studs from the push-pins situated on the air deflector before extracting the air deflector from the front Bumper fascia. You should position the air deflector onto the front Bumper assembly before fastening the push-pins' connection ends onto the front Bumper deflector. If the vehicle has fog lamps install them and connect their electrical cords before lowering the vehicle down from height.

Replacing the rear bumper fascia begins with retaining remover of the top fascia and disconnecting the license plate lamp harness. To begin the process use necessary safety stands that will elevate and support the vehicle. Begin by taking off the fascia starting from below using push-pins while moving on to remove it from the impact bar. Position the locator pin of the fascia to match the impact bar hole before pushing the push-pin retainers through fascia bottom. Put on safety stands and lower the vehicle while connecting the license plate lamp harness before installing the top fascia retainers.

Lower the vehicle.

Disconnect the fog lamp electrical connectors and remove the fog lamps.