Make sure this part fits

GM 20794268
Strut, Front Passenger Side

2005-2011 GM

Customer Questions & Expert Answers (13)
GM 20794268 Strut, Front Passenger Side
GM 20794268 Strut, Front Passenger Side
  • Part Description
    Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.
  • Position
    Front Passenger Side
  • Replaces
    15876216, 15247244, 15798898
  • Manufacturer
    General Motors
Make sure this part fits
$129.74 MSRP: $243.64
You Save: $113.90 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2009 Chevrolet CobaltBase, LS, LT, LTZ, Sport, SS4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2006-2011 Chevrolet HHRLS, LS Panel, LT, LT Panel, SS, SS Panel4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
    2007-2009 Pontiac G5Base, GT4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 20794268 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 20794268 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step in the installation process for the 2005 Chevrolet Cobalt? Posted by Customer
    A:
    First install the strut and then the strut upper mounting nuts, tightening them to 20 Nm (15 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the next step after supporting the rear axle for the 2006 Chevrolet Cobalt? Posted by Customer
    A:
    Remove the upper and lower shock bolts and take the shock out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done to contain escaping oil when drilling for the 2007 Chevrolet Cobalt? Posted by Customer
    A:
    Use shop towels to contain the escaping oil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should the rear axle be supported for the 2008 Chevrolet Cobalt? Posted by Customer
    A:
    Use a tall jack stand near the shock absorber.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the first step to replace the suspension strut for the 2009 Chevrolet Cobalt? Posted by Customer
    A:
    Begin by removing the strut upper mounting nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What safety precautions should be taken when working with shock absorbers for the 2005 Chevrolet Cobalt? Posted by Customer
    A:
    Wear safety glasses when centerpunching and drilling the shock absorber, and take care not to puncture the shock absorber tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be removed next after raising for the 2009 Chevrolet HHR? Posted by Customer
    A:
    Remove the stabilizer shaft link from the front suspension strut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should the stabilizer shaft link be connected for the 2007 Chevrolet HHR? Posted by Customer
    A:
    Connect the stabilizer shaft link to the strut assembly, tightening the stabilizer shaft link nut to 80 N.m (59 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What are the final steps after completing the installation for the 2006 Chevrolet HHR? Posted by Customer
    A:
    Install the tire and wheel, lower the vehicle, and align the front wheels.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should the shock absorber be positioned to drain the oil completely for the 2006 Chevrolet HHR? Posted by Customer
    A:
    Remove the shock absorber from the vise, hold it over a drain pan horizontally with the holes down, and move the rod in and out of the tube to completely drain the oil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be disconnected after removing the front suspension strut nut for the 2008 Chevrolet HHR? Posted by Customer
    A:
    Disconnect the wheel speed sensor electrical connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after installing the strut to the coil spring and upper strut mount for the 2010 Chevrolet HHR? Posted by Customer
    A:
    Loosely install the strut retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Strut, Front Passenger Side 20794268 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 20794268 Strut, Front Passenger Side is available in the market under the name GM Shock Absorber. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 20794268 Strut, Front Passenger Side fits certain Chevrolet Cobalt, HHR models, as well as Pontiac G5 models.
The original GM component designated by manufacturer part number 20794268 maintains top performance when functioning as the Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly. unit at its Front Passenger Side. The component 20794268 is constructed from durable material and its dimensions span 24.5 x 9.1 x 8.2 inches while weighing 8.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Strut Kit, Front And Rear Suspension. The part 20794268 has available replacement options 15876216, 15247244, 15798898. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.