Make sure this part fits

GM 15896770
Steering Gear

2007-2009 GM

Customer Questions & Expert Answers (6)
GM 15896770 Steering Gear
  • Part Description
    Gear, Steering
  • Position
    Inner Outer
  • Replaces
    25917902
  • Manufacturer
    General Motors
Make sure this part fits
$453.37 MSRP: $838.80
You Save: $385.43 (46%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15896770
    Part DescriptionGear, Steering
    Other NamesGear Assembly
    Item Dimensions8.2 x 64.1 x 6.2 inches
    Item Weight14.30 Pounds
    PositionInner Outer
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces25917902
    ManufacturerGeneral Motors
    SKU15896770
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2009 Chevrolet EquinoxLS, LT, LTZ6 Cyl 3.4 L GAS
    2007-2009 Pontiac TorrentBase6 Cyl 3.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15896770 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15896770 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front Rack and Pinion steering gear (EPS) on Chevrolet Equinox? Posted by Customer
    A:
    Locking the Steering Column for damage prevention to the sir system becomes essential when first securing the Steering Wheel using a strap to stop wheel rotation. Once the Steering Wheel is secured with the strap maintain the vehicle in an elevated position before proceeding with wheel removal. The next step involves removing both outer tie rod to Steering Knuckle nuts before disposal and then doing without a pickle fork or wedge-type tool when freeing the ball stud to protect both the seal and bushing. The j 24319-b tool enables separation of tie rods from steering knuckles but the ball stud requires handling to stay stationary. A rotation of the intermediate Steering Shaft allows access to the intermediate shaft pinch bolt for removal until the intermediate to Rack And Pinion pinch bolt is removed and the intermediate shaft disconnects from the Rack And Pinion. Rack And Pinion replacement begins with removing Rack And Pinion to cradle mounting bolts then disconnecting stabilizer links from the stabilizer bar before extracting the Rack And Pinion through the vehicle's right side. Start with heat shield installation using proper gear clearance positioning of the stabilizer followed by right-side Rack And Pinion insertion which centers the bushings inside cradle supports. Start each Rack And Pinion bolt for cradles by hand then torque both bolts to 110 n.m (81 lb ft). Use a new pinch bolt to link the intermediate shaft to the Rack And Pinion while tightening it to 34 n.m (25 lb ft). The stabilizer bar requires the links connection while using a ball stud holder to avoid rotations during nut tightening. Secondly install a new nut between the tie rod and knuckle before winding it to a torque of 25 n.m (18 lb ft) and a 90-degree angle. After tire and wheel installation you should check front wheel alignment then perform alignments if any are needed before the vehicle reaches ground level.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after installing the power steering gear hoses for the 2008 Chevrolet Equinox? Posted by Customer
    A:
    Install the transaxle mount and transaxle mount bolts tightened to 50 N.m (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Rack And Pinion
    Q:
    What is the next step after accessing the intermediate shaft pinch bolt for the 2009 Chevrolet Equinox? Posted by Customer
    A:
    Remove the intermediate to steering gear pinch bolt and disconnect the intermediate shaft from the steering gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Rack And Pinion
    Q:
    How do you remove the power steering gear for the 2009 Chevrolet Equinox? Posted by Customer
    A:
    Remove the power steering gear bolts and take out the power steering gear through the left wheel house area, transferring any necessary parts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Rack And Pinion
    Q:
    What should be done with the outer tie rod to steering knuckle nuts for the 2007 Chevrolet Equinox? Posted by Customer
    A:
    Remove and discard them, ensuring not to use a pickle fork or wedge-type tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Rack And Pinion
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15896770, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15896770 Steering Gear. It is sometimes referred to as GM Rack And Pinion. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15896770 Steering Gear. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery