Make sure this part fits

GM 10365683
Grip Handle, Rear Passenger Side

1997-2005 GM

Customer Questions & Expert Answers (7)
GM 10365683 Grip Handle, Rear Passenger Side
  • Part Description
    Handle, Rear Quarter And Roof Rail Assist Strap
  • Position
    Rear Passenger Side
  • Replaces
    10259210, 10437268
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10365683
    Part DescriptionHandle, Rear Quarter And Roof Rail Assist Strap
    Other NamesAssist Strap
    Item Dimensions8.5 x 5.5 x 1.5 inches
    Item Weight0.90 Pounds
    PositionRear Passenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10259210, 10437268
    ManufacturerGeneral Motors
    SKU10365683
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2005 Pontiac MontanaBase6 Cyl 3.4 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 10365683 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10365683 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the inner sliding door handle on Chevrolet Venture? Posted by Customer
    A:
    Before handling the inside handle of a sliding door the psd 15a fuse must be removed from the instrument panel (I/P) fuse block to disable power sliding door (PSD) system functionality. This removes low current logic power supply to both lh and rh power sliding door modules (PSDM). You need the Door Handle tool (J-45678) to remove the inside Door Handle clip after which you can extract the handle from the sliding door. To install the Door Handle push the clip into place on the upper side with the proper opening orientation before aligning the handle to fit onto the sliding door shaft. Firm pressure should then be applied to lock the placement. Leave the psd 15a fuse inside the i/p fuse block for power restoration which will force each psdm to learn its complete open and closed operations.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the inner trim panel and water deflector for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Detach the control rods from the sliding door outside handle lock cylinder, pry the barrel nut out of the lock assembly, and push the lock rod away from the sliding door lock assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be reattached after installing the new handle for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Reattach the rod to the lock cylinder and connect the front door outside handle rod to the outside handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the torque specification for tightening the screws for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Tighten them to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you reattach the door inside handle assembly for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Reattach it to the lock module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you secure the sliding door outside handle for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Attach the sliding door outside handle to the sliding door and secure it with nuts, tightening them to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 10365683, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 10365683 Grip Handle, Rear Passenger Side. It is sometimes referred to as GM Door Handle. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 10365683 Grip Handle, Rear Passenger Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery