Make sure this part fits

GM 15773793
Handle, Outside, Passenger Side

2005-2016 GM

Customer Questions & Expert Answers (11)
GM 15773793 Handle, Outside, Passenger Side
  • Part Description
    Handle, Door Outside Handle; Exterior Door Handle
  • Position
    Passenger Side
  • Replaces
    15233601
  • Manufacturer
    General Motors
Make sure this part fits
$73.37 MSRP: $109.21
You Save: $35.84 (33%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2009 Buick LaCrosseCX, CXL, CXS, Super6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    2007-2013 Chevrolet Impala50th Anniversary Edition, LS, LT, LTZ, Police, SS6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2014-2016 Chevrolet Impala LimitedLS, LT, LTZ, Police6 Cyl 3.6 L FLEX
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15773793 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15773793 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after securing the outside handle bolt for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Secure the three bolts to the rear door handle, also tightening them to 10 N.m (89 lb in), and reinstall the rear door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you complete the process for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Inspect the outside door handle for proper operation, remove the masking tape, and reinstall the rear door water deflector and the rear door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new outside door handle for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Place the outside door handle and the rod back into the door, then install the outside handle bolt through the latch hole, tightening it to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in the installation process for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Replace the outside door handle bolt access tape, insert the outside handle rod into the clip, and close the clip cover over the rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done with the outside handle rod for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Insert the outside handle rod into the clip, closing the clip cover afterward.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after verifying the handle for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Remove the masking tape and reinstall the front door water deflector and trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How should the three bolts be installed for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Install the three bolts to the rear door handle, also tightening them to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you access the rear door lock for the 2010 Chevrolet Impala? Posted by Customer
    A:
    Open the outside handle rod to the lock clip on the door lock, then remove the rear door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after removing the rear door lock for the 2009 Chevrolet Impala? Posted by Customer
    A:
    Take off the outside door handle bolt access tape and remove the three bolts from the rear door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    Why should masking tape be applied around the outside handle for the 2008 Chevrolet Impala? Posted by Customer
    A:
    To protect the paint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Handle, Outside, Passenger Side 15773793 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15773793 Handle, Outside, Passenger Side is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15773793 Handle, Outside, Passenger Side fits certain Chevrolet Impala, Impala Limited models, as well as Buick LaCrosse models.
The original GM component designated by manufacturer part number 15773793 maintains top performance when functioning as the Handle, Door Outside Handle; Exterior Door Handle unit at its Passenger Side. The component 15773793 is constructed from durable material and its dimensions span 4.2 x 4.2 x 14.3 inches while weighing 0.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15773793 has available replacement options 15233601. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.