Make sure this part fits

GM 19366675
Flex Hose, Front Driver Side

2004-2013 GM

Customer Questions & Expert Answers (14)
GM 19366675 Flex Hose, Front Driver Side
  • Part Description
    Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front Driver Side
  • Replaces
    15802377, 19331542
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac XLRBase, Platinum, V8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2005-2013 Chevrolet Corvette427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR18 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19366675 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366675 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you detach the brake hose from the brake caliper for the 2005 Cadillac XLR? Posted by Customer
    A:
    Remove the brake caliper inlet fitting bolt from the caliper and detach the brake hose, discarding the two copper brake hose gaskets that may be stuck to the caliper or hose end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be discarded during the detachment process for the 2009 Cadillac XLR? Posted by Customer
    A:
    Discard the two copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step in the process for the 2007 Cadillac XLR? Posted by Customer
    A:
    Inspect the area of the brake pipe to be replaced and release it from the retainers as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What are the final steps after connecting the brake pipe fitting for the 2007 Cadillac XLR? Posted by Customer
    A:
    Reinstall the tire and wheel assembly, bleed the hydraulic brake system, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the process for creating a flare on the brake pipe for the 2004 Cadillac XLR? Posted by Customer
    A:
    Insert the prepared pipe end into the dies, tighten the clamping screw, and use the forming mandrel to create the flare, checking the flare's shape and diameter against specifications.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after attaching the brake hose to the bracket for the 2008 Cadillac XLR? Posted by Customer
    A:
    Remove the rubber cap or plug from the exposed brake pipe fitting end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake hose be installed to the hose bracket for the 2009 Cadillac XLR? Posted by Customer
    A:
    Ensure it is not kinked or twisted, and secure the retainer onto the brake hose fitting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be checked after creating the flare for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Inspect the flare for correct shape and diameter (7.10 mm (0.279 in) +/- 0.18 mm (0.007 in) for 4.76 mm (3/16 in) diameter pipe).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the next step after chamfering the pipe for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    Install the tube nuts, clean the brake pipe and tool of any contaminants, and loosen the die clamping screw.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What safety precautions should be followed for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Follow safety precautions regarding brake fluid irritants and use double-walled steel brake pipes to prevent system failure.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What are the final steps after connecting the brake pipe fitting for the 2005 Chevrolet Corvette? Posted by Customer
    A:
    Reinstall the tire and wheel assembly, bleed the hydraulic brake system, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after installing the brake hose assembly for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    Bleed the hydraulic brake system and reinstall the tire and wheel assembly, removing the disc brake rotor protectors afterward.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be checked after flaring for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Inspect the shape and diameter of the flare, ensuring it measures 7.10 mm (0.279 inch) with a tolerance of 0.18 mm (0.007 inch).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Front Driver Side 19366675 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19366675 Flex Hose, Front Driver Side is available in the market under the name GM Brake Line. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19366675 Flex Hose, Front Driver Side fits certain Chevrolet Corvette models, as well as Cadillac XLR models.
The original GM component designated by manufacturer part number 19366675 maintains top performance when functioning as the Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Front Driver Side. The component 19366675 is constructed from durable material and its dimensions span 6.2 x 2.0 x 14.4 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 19366675 has available replacement options 15802377, 19331542. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.