Make sure this part fits

GM 19366732
Flex Hose, Front

2001-2002 GM

Customer Questions & Expert Answers (5)
GM 19366732 Flex Hose, Front
  • Part Description
    Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front
  • Replaces
    22163606
  • Manufacturer
    General Motors
Make sure this part fits
$67.76 MSRP: $121.00
You Save: $53.24 (44%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19366732
    Part DescriptionHose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
    Other NamesHose, Hydraulic Brake
    Item Dimensions6.4 x 25.2 x 1.0 inches
    Item Weight1.30 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces22163606
    ManufacturerGeneral Motors
    SKU19366732
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2001-2002 Chevrolet Express 3500Base, LS8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 8.1 L GAS
    2001-2002 GMC Savana 3500Base, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 8.1 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 19366732 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366732 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front brake line on GMC Savana 3500? Posted by Customer
    A:
    Before replacing the front brake hose you must use safety stands to lift and stabilize the car plus take off its front wheels and tires. Bypass any foreign matter from the brake hose ends before starting service work. Deflate the Brake Line from the hose connection point before taking out the retaining nut and clip which secures the front brake hose. Begin service by taking off the upper Control Arm bracket and retaining bolt of the front brake hose then releasing both the front brake caliper bolt and hose gaskets before taking out the brake hose. Remove the front brake hose from its installed position. Apply new gaskets to the front brake hose ends and reinsert it into the vehicle after. Fix the front brake hose retaining bolt to the brake caliper first then bolt the bracket and arm together at 20 nm (15 ft. Lbs.). Secure the retaining clip and nut onto the front brake hose but keep them straight and away from suspension parts. Join the brake pipe from the front wheel to the brake hose while using 20 nm torque settings (15 ft. Lbs.). Next, purge air from the brake system. Reinstall the tires and wheels after you take off the safety stands and bring the vehicle down.
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the final steps after installing the brake hose for the 2001 Chevrolet Express 3500? Posted by Customer
    A:
    Bleed the hydraulic brake system, reinstall the tires and wheels, and finally remove the safety stands before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What are the torque specifications for tightening brake pipe fittings for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Tighten the fittings to 20 Nm (15 ft. lbs.) for the BPMV or wheel jounce hoses and to 30 Nm (22 ft. lbs.) for the master cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done with the junction block retaining bolt during installation for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Install the junction block retaining bolt to the rear axle and tighten it to 20 Nm (15 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19366732, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19366732 Flex Hose, Front. It is sometimes referred to as GM Brake Line. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19366732 Flex Hose, Front. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery