Make sure this part fits

GM 22837065
Flex Hose, Front Driver Side

2008-2014 Cadillac CTS

Customer Questions & Expert Answers (8)
GM 22837065 Flex Hose, Front Driver Side
  • Part Description
    Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front Driver Side
  • Replaces
    25928987, 25875358
  • Manufacturer
    General Motors
Make sure this part fits
$33.76 MSRP: $63.40
You Save: $29.64 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number22837065
    Part DescriptionHose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
    Other NamesHose, Hydraulic Brake
    Item Dimensions28.8 x 2.1 x 2.1 inches
    Item Weight1.30 Pounds
    PositionFront Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces25928987, 25875358
    ManufacturerGeneral Motors
    SKU22837065
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2014 Cadillac CTSBase, Luxury, Performance, Premium6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22837065 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22837065 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the rear brake hose for the 2009 Cadillac CTS? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the clutch hydraulic hose be routed during installation for the 2010 Cadillac CTS? Posted by Customer
    A:
    The hose should be routed upward above the clutch slave cylinder without sharp bends, kinks, or downward loops, and should not contact any sharp or hot surfaces.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What should be done after removing the tire and wheel assembly for the 2008 Cadillac CTS? Posted by Customer
    A:
    Disconnect the front brake pipe fitting and cap it to prevent brake fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the procedure after lowering for the 2008 Cadillac CTS? Posted by Customer
    A:
    Install the clutch hydraulic hose retaining clip to the clutch master cylinder and connect the clutch hydraulic hose to the clutch master cylinder, pushing it in until a "click" is heard and tugging gently to confirm retention.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What should be done after tightening the brake hose retainer bolt for the 2010 Cadillac CTS? Posted by Customer
    A:
    Connect the wheel speed sensor wire harness clip to the brake hose retainer and install the front brake hose retainer clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done with the brake hose fitting bolt and gaskets for the 2009 Cadillac CTS? Posted by Customer
    A:
    Remove the brake hose fitting bolt and the brake hose fitting gaskets from the brake hose, discarding the gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done with the clutch hydraulic hose after disconnecting it for the 2009 Cadillac CTS? Posted by Customer
    A:
    Remove the clutch hydraulic hose retainer and take out the clutch hydraulic hose from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 22837065, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 22837065 Flex Hose, Front Driver Side. It is sometimes referred to as GM Brake Line, GM Hydraulic Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 22837065 Flex Hose, Front Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery