Make sure this part fits

GM 15903239
Power Steering Pressure Hose

2005-2013 Chevrolet Corvette

Customer Questions & Expert Answers (12)
GM 15903239 Power Steering Pressure Hose
GM 15903239 Power Steering Pressure Hose
  • Part Description
    Hose Assembly-Power Steering Gear Inlet; Power Steering Hose
  • Replaces
    10311289
  • Manufacturer
    General Motors
Make sure this part fits
$191.20 MSRP: $300.83
You Save: $109.63 (37%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15903239
    Part DescriptionHose Assembly-Power Steering Gear Inlet; Power Steering Hose
    Other NamesPressure Hose; Hose, Steering Gear Oil Pressure
    Item Dimensions24.7 x 6.1 x 6.2 inches
    Item Weight3.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10311289
    ManufacturerGeneral Motors
    SKU15903239
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2013 Chevrolet Corvette427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15903239 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15903239 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the power steering pump pulley for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Detach the power steering pressure hose from the power steering pump and the power steering gear, then take the hose out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should you do after connecting the hose to the power steering gear for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Lower the vehicle and attach the hose back to the power steering fluid reservoir.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should you do with excess fluid from the actuator cylinder for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Drain any excess fluid into a container.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What is the next step after securing the new hose for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Connect the hose to the power steering gear and tighten the fitting to 27 N.m (20 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after removing the power steering fluid for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    Disconnect the power steering return hose from the remote power steering fluid reservoir, then raise the vehicle on a hoist.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the hydraulic clutch hose for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    Remove the clutch actuator cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What is the first step to replace the hydraulic clutch hose for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Remove the clutch actuator cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What should you do after securing the hose for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Rotate the hose to confirm it moves freely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What is the torque specification for tightening the fitting to the power steering gear for the 2005 Chevrolet Corvette? Posted by Customer
    A:
    Tighten the fitting to 27 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you remove the roll-pin that retains the hydraulic hose for the 2005 Chevrolet Corvette? Posted by Customer
    A:
    Use a small drift or punch to take out the roll-pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What is the final step in the process for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Finally, bleed the power steering system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15903239, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15903239 Power Steering Pressure Hose. It is sometimes referred to as GM Hydraulic Hose, GM Power Steering Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15903239 Power Steering Pressure Hose. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery