Make sure this part fits

GM 15895319
Stabilizer Link, Rear Driver Side

2004-2011 GM

Customer Questions & Expert Answers (12)
GM 15895319 Stabilizer Link, Rear Driver Side
GM 15895319 Stabilizer Link, Rear Driver Side
  • Part Description
    Link Assembly-Rear Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
  • Position
    Rear Driver Side
  • Replaces
    25768311, 15840471
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2006-2009 Pontiac SolsticeBase, GXP4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
    2007-2010 Saturn SkyBase, Red Line4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15895319 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15895319 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step after completing the installation for the 2006 Cadillac SRX? Posted by Customer
    A:
    Reinstall the tire and wheel before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the first step in the installation process of the stabilizer shaft link for the 2005 Cadillac SRX? Posted by Customer
    A:
    Attach the stabilizer shaft link to the lower control arm and then to the stabilizer shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be detached after removing the retaining nuts for the 2009 Cadillac STS? Posted by Customer
    A:
    Detach the stabilizer shaft link from both the stabilizer shaft and the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the first step in the installation process for the 2007 Cadillac STS? Posted by Customer
    A:
    Attach the stabilizer shaft link to the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the first step to replace the stabilizer shaft link in the front suspension for the 2006 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    Why is it important to hold the shaft link studs with a hex tool for the 2007 Cadillac SRX? Posted by Customer
    A:
    To prevent damage to the link seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be removed first, the upper or lower retaining nut for the 2008 Cadillac SRX? Posted by Customer
    A:
    The upper retaining nut should be removed first, followed by the lower retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the initial step for installation of the new stabilizer shaft link for the 2009 Cadillac SRX? Posted by Customer
    A:
    Position the new stabilizer shaft link without tightening the nuts initially.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the next step after removing the upper retaining nut for the 2005 Cadillac STS? Posted by Customer
    A:
    Remove the stabilizer shaft link lower retaining nut and take the stabilizer shaft link out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be removed after raising for the 2008 Cadillac STS? Posted by Customer
    A:
    Remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    Why is it important to hold the shaft link stud with a hex tool for the 2006 Cadillac STS? Posted by Customer
    A:
    To prevent damage to the link seal while removing the stabilizer shaft link retaining nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Stabilizer Link, Rear Driver Side 15895319 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15895319 Stabilizer Link, Rear Driver Side is available in the market under the name GM Sway Bar Link. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15895319 Stabilizer Link, Rear Driver Side fits certain Cadillac SRX, STS models, as well as Pontiac Solstice. Additionally, it is compatible with Saturn Sky models.
The original GM component designated by manufacturer part number 15895319 maintains top performance when functioning as the Link Assembly-Rear Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link unit at its Rear Driver Side. The component 15895319 is constructed from durable material and its dimensions span 6.4 x 3.2 x 3.0 inches while weighing 0.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Link; Link, Stabilizer Shaft. The part 15895319 has available replacement options 25768311, 15840471. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.