Make sure this part fits

GM 12607282
Intake Manifold

2009-2011 GM

Customer Questions & Expert Answers (4)
GM 12607282 Intake Manifold
  • Part Description
    Manifold, Engine Fuel Intake Manifold
  • Manufacturer
    General Motors
Make sure this part fits
$1266.98 MSRP: $2001.65
You Save: $734.67 (37%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number12607282
    Part DescriptionManifold, Engine Fuel Intake Manifold
    Item Dimensions21.1 x 18.6 x 8.3 inches
    Item Weight14.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU12607282
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2009-2011 Buick EnclaveCX, CXL6 Cyl 3.6 L GAS
    2010-2011 Buick LaCrosseCX, CXL, CXS6 Cyl 3.6 L GAS
    2009-2011 Chevrolet TraverseLS, LT, LTZ6 Cyl 3.6 L GAS
    2009-2011 GMC AcadiaDenali, SL, SLE, SLT6 Cyl 3.6 L GAS
    2009-2010 Saturn OutlookXE, XR6 Cyl 3.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 12607282 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12607282 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the intake manifold on Buick Enclave? Posted by Customer
    A:
    To replace the Intake Manifold, follow the procedure of turning off the ignition and remove the fuel injector sight shield. Next, remove air cleaner outlet duct and disconnect the brake booster from the Intake Manifold vacuum hose. Unplug the purge solenoid valve electrical connector, and the purge line from the purge hose. Then remove the rear positive crankcase ventilation hose. Unplug the throttle body electrical connector and pry off the electrical connector retainer. Take off the fuel pipe shield, remove the engine wiring harness retaining clip from the side of the Intake Manifold, then the wire harness retaining bolt and clips. Lift the engine wiring harness off the location, pull off the Intake Manifold insulator and bolts, followed by disassembling the Intake Manifold off with the throttle body. In the case of replacing the Intake Manifold, disassemble and clean. For installation, mesh the new Intake Manifold if required and install a fresh Intake Manifold Gasket, afterward the Intake Manifold itself to 23 nm (17 lb ft) while tightening while starting at the center (long bolts) and moving it outwards followed by a new Intake Manifold Gasket, thereafter, the Intake Manifold itself. Put back the engine wiring harness, install the retaining clips to the Intake Manifold and the clip to the side. Replace the fuel pipe shield and check the engagement of the wiring harness connector. Connect the electrical connector to the throttle body and install the electrical connector retainer, as well as connect the purge line to the purge solenoid valve putting the purge solenoid valve electrical connector. After that, reinstall rear positive crankcase ventilation hose and join Brake Booster Vacuum Hose to the Intake Manifold, so as to install the air cleaner outlet duct and fuel injector sight shield.
    Posted by ChevyPartsGiant Specialist
    Q:
    What components need to be removed after the hoses for the 2010 Buick LaCrosse? Posted by Customer
    A:
    Remove the fuel pump cover bolt and retainers, then take off the fuel pump cover and the fuel line booster hose bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What electrical connections need to be made after the fuel pipe shield for the 2009 Chevrolet Traverse? Posted by Customer
    A:
    Connect the electrical connector to the throttle body and install the electrical connector retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 12607282, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 12607282 Intake Manifold. It is sometimes referred to as GM Intake Manifold. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 12607282 Intake Manifold. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery