GM 94859565
Transmission Mount

Begin the left automatic transmission mount replacement process by disconnecting the positive and negative battery cables followed by removing the battery hold down bracket bolt and nut together with the battery bracket and battery and battery tray. The replacement process begins with disconnecting the iat connector followed by removing the iat sensor along with the air cleaner hose and cap assembly and Air Filter and the three air cleaner lower box bolts to extract the air cleaner box. Installation begins with an engine support fixture before pursuing removal of the transaxle left mount through bolt and four bolts securing the left transaxle mount and subsequent removal of the left transaxle bracket bolts and bracket. For installation, start by securing the left transaxle bracket with the three bolts, tightening them to 60 nm (44 ft. Lbs.)begin by mounting the left transaxle mount with its four bolts before tightening every bolt to 60 nm (44 ft. Lbs.). Install the transaxle mount through bolt and tighten it to 60 nm (44 ft. Lbs.)next remove the engine support fixture. Reinstall the air cleaner box after joining its three bolts and install the Air Filter and air cleaner hose and cap assembly followed by the iat sensor before connecting the iat connector. Finally, reinstall the battery tray and battery, secure the hold down bracket, and tighten the hold down bracket bolt and nut to 12 nm (106 inch lbs.)finally connect the battery cables before tightening them together.

Disconnect the IAT connector and remove the IAT sensor, air cleaner hose and cap assembly, air filter, and the three air cleaner lower box bolts to take out the air cleaner box.

Install the air filter, air cleaner hose, and cap assembly.

Disconnect the positive and negative battery cables.