Make sure this part fits

GM 26068609
Pipe Kit, Passenger Side

1998-2007 GM

Customer Questions & Expert Answers (17)
GM 26068609 Pipe Kit, Passenger Side
  • Part Description
    Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2003 Buick CenturyCustom, Limited6 Cyl 3.1 L GAS
    2005-2007 Buick LaCrosseCXS6 Cyl 3.6 L GAS
    1999-2003 Buick RegalGS, GSE, LS, LSE6 Cyl 3.8 L GAS
    1998-2002 Oldsmobile IntrigueBase, GL, GLS, GX6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
    1998-2003 Pontiac Grand PrixGT, GTP, SE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26068609 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26068609 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What torque should be applied to the pressure hose fittings for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Tighten the pressure hose fittings to 27 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should you do after securing the hose to the power steering gear for the 2002 Buick Century? Posted by Customer
    A:
    Attach the hose to the power steering gear and the retaining bracket on the engine, then lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after connecting the new cooler pipe for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Raise the vehicle again, ensuring to follow fastener precautions, and install the cooler pipe to the power steering gear, tightening the cooler pipe fitting to 27 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How tight should the fitting be when connecting the new hose for the 2003 Buick Century? Posted by Customer
    A:
    Ensure to tighten the fitting to 27 N.m (20 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done with the retaining clips for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Unclip the power steering pressure hose retaining clips and remove the pressure hose from the vehicle, discarding it along with the hose connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the Power Steering Return Hose for the 2002 Buick Century? Posted by Customer
    A:
    Place a drain pan under the vehicle to catch any draining power steering fluid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What are the final steps after reassembling for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Remove the drain pan, lower the vehicle, fill the power steering system with power steering fluid, bleed the system, and finally inspect for leaks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What components need to be reinstalled after securing the engine mounts for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Reinstall the RH engine splash shield, tire and wheel assembly, and remove the drain pan.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you secure the power steering pressure line to the power steering for the 2001 Buick Century? Posted by Customer
    A:
    Install the gear that secures the power steering pressure line to the power steering using the same 18-mm crow's foot line wrench and tighten it to 27 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after installing the new hose for the 2000 Buick Regal? Posted by Customer
    A:
    Reinstall the tire and wheel assembly, remove the drain pan, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be removed after raising for the 2000 Buick Regal? Posted by Customer
    A:
    Remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you detach the power steering pressure hose for the 2002 Buick Regal? Posted by Customer
    A:
    Detach it from the gear, then from the power steering pump, and finally from the clamps on the power steering gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after removing the tire and wheel assembly for the 2001 Buick Regal? Posted by Customer
    A:
    Detach the power steering pressure line from the power steering pump and remove it from the clamps on the power steering gear before taking it out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the installation process for the return hose for the 2003 Buick Regal? Posted by Customer
    A:
    Attach the return hose to the hose retainer, then to the power steering pump, and finally to the power steering gear, tightening the fitting to 27 N.m (20 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after securing the cooler pipe for the 2000 Buick Century? Posted by Customer
    A:
    Install the power steering cooler pipe retaining bolt and tighten it to 9.5 Nm (86 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you remove the cooler pipe for the 2001 Buick Regal? Posted by Customer
    A:
    Take out the cooler pipe from the retaining clips on the frame and remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pipe Kit, Passenger Side 26068609 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26068609 Pipe Kit, Passenger Side is available in the market under the name GM Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26068609 Pipe Kit, Passenger Side fits certain Buick Regal, LaCrosse, Century models, as well as Pontiac Grand Prix. Additionally, it is compatible with Oldsmobile Intrigue models.
The original GM component designated by manufacturer part number 26068609 maintains top performance when functioning as the Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose unit at its Passenger Side. The component 26068609 is constructed from durable material and its dimensions span 16.7 x 3.2 x 2.6 inches while weighing 0.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Line Kit. The part 26068609 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.