Make sure this part fits

GM 15237321
Brake Booster

2006-2011 Cadillac DTS

Customer Questions & Expert Answers (6)
GM 15237321 Brake Booster
  • Part Description
    Booster, Hydraulic Power Brake Booster
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15237321
    Part DescriptionBooster, Hydraulic Power Brake Booster
    Item Dimensions11.9 x 15.6 x 11.6 inches
    Item Weight11.90 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU15237321
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15237321 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15237321 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Safely Replace a Brake Booster on Cadillac DTS? Posted by Customer
    A:
    Safety precautions begin with disconnecting the battery negative cable followed by setting the vehicle on level ground with blocked front wheels and activated parking brake. Unplug all three hoses which connect the power steering inlet to the pressure hose and gear to booster assembly. The work begins by removing the master cylinder and wiring harness bracket and spacer from the booster assembly followed by removal of the left closeout insulator panel and left knee bolster and vacuum Brake Booster retainer clip and foam spacer. Additionally you must disconnect the vacuum Brake Booster push rod at its connection to the Brake Pedal clevis pin. The installation begins by taking out the vacuum Brake Booster mounting nuts followed by removing the assembly and its mounting gasket when a replacement is needed. After applying the vacuum Brake Booster mounting gasket to the booster you must install the assembly and fasten it with Brake Pedal assembly to booster stud mounting nuts which need a torque of 36 n.m (27 lb ft). Install a small amount of gm p/n 12346293 compatible lubricant onto the Brake Pedal clevis pin after which the vacuum Brake Booster pushrod should be connected to the Brake Pedal assembly clevis pin and the foam spacer and retaining clip should be installed. First install the left knee bolster with the left closeout insulator panel before putting on the booster spacer along with the wiring harness bracket. The master cylinder needs readjustment onto the booster assembly while the power steering pressure hose must connect along with the power steering gear to booster hose as well as power steering inlet hose. To finish the procedure disconnect the negative Battery Cable followed by bleeding the hydraulic booster system then recalibrating the brake position sensor and unblocking the front wheels and releasing the parking brake.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after reinstalling the left components for the 2010 Cadillac DTS? Posted by Customer
    A:
    Install the booster spacer and wiring harness bracket, then attach the master cylinder to the booster assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Booster
    Q:
    What are the final steps after reconnecting the hoses for the 2009 Cadillac DTS? Posted by Customer
    A:
    Reconnect the negative battery cable, bleed the hydraulic booster system, recalibrate the brake position sensor, remove the blocks from the front wheels, and release the parking brake.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Booster
    Q:
    What should be connected to the brake pedal assembly clevis pin for the 2006 Cadillac DTS? Posted by Customer
    A:
    Connect the vacuum brake booster pushrod to the brake pedal assembly clevis pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Booster
    Q:
    What should be taken out from the booster assembly for the 2007 Cadillac DTS? Posted by Customer
    A:
    Take out the spacer from the booster assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Booster
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15237321, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15237321 Brake Booster. It is sometimes referred to as GM Brake Booster. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15237321 Brake Booster. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery