Make sure this part fits

GM 22807708
Brake Booster

2010-2017 GM

Customer Questions & Expert Answers (3)
GM 22807708 Brake Booster
GM 22807708 Brake Booster
  • Part Description
    Booster, Hydraulic Power Brake Booster
  • Replaces
    20849578, 20985652, 20990926
  • Manufacturer
    General Motors
Make sure this part fits
$156.64 MSRP: $303.97
You Save: $147.33 (49%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2010-2017 Chevrolet EquinoxL, LS, LT, LTZ, Premier4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
    2010-2017 GMC TerrainDenali, SL, SLE, SLT4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22807708 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22807708 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power vacuum brake booster on Chevrolet Equinox? Posted by Customer
    A:
    To start replacing the power vacuum Brake Booster you need to disconnect the vacuum Brake Booster sensor connections then set them to the side. First remove the master cylinders and then unfasten the brake pressure modulator valve (BPMV) unit in combination with its retaining bracket. Next you must take the brake pedal position sensor out. Unscrew the Pushrod retainer nut of the vacuum Brake Booster and detach the Pushrod at its brake pedal end. Pull the vacuum booster forward with four installed nuts while ensuring the mounting studs exit the dash panel to remove the foam insulator. Check the gasket for damage when you take out the vacuum Brake Booster and replace it if defective. To begin install you must put the vacuum Brake Booster gasket in place followed by correct installation of the foam insulator. Put the Brake Booster Pushrod and mounting studs through the dash panel in their installation path. Fasten the vacuum Brake Booster nuts to 25 nm (18 lb ft) and reconnect the brake pedal Pushrod using proper 360-degree installation of the Pushrod retainer. Seal the brake pedal position sensor with a 25 nm torque while mounting the bpmv bracket and bpmv to the engine bay. Reinsert the master cylinder then put back both the vacuum Brake Booster vacuum sensor and hose.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power vacuum brake booster on GMC Terrain? Posted by Customer
    A:
    To start replacing the power vacuum Brake Booster you need to disconnect the vacuum Brake Booster sensor connections then set them to the side. First remove the master cylinders and then unfasten the brake pressure modulator valve (BPMV) unit in combination with its retaining bracket. Next you must take the brake pedal position sensor out. Unscrew the Pushrod retainer nut of the vacuum Brake Booster and detach the Pushrod at its brake pedal end. Pull the vacuum booster forward with four installed nuts while ensuring the mounting studs exit the dash panel to remove the foam insulator. Check the gasket for damage when you take out the vacuum Brake Booster and replace it if defective. To begin install you must put the vacuum Brake Booster gasket in place followed by correct installation of the foam insulator. Put the Brake Booster Pushrod and mounting studs through the dash panel in their installation path. Fasten the vacuum Brake Booster nuts to 25 nm (18 lb ft) and reconnect the brake pedal Pushrod using proper 360-degree installation of the Pushrod retainer. Seal the brake pedal position sensor with a 25 nm torque while mounting the bpmv bracket and bpmv to the engine bay. Reinsert the master cylinder then put back both the vacuum Brake Booster vacuum sensor and hose.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Brake Booster 22807708 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22807708 Brake Booster is available in the market under the name GM Brake Booster. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22807708 Brake Booster fits certain Chevrolet Equinox models, as well as GMC Terrain models.
The original GM component designated by manufacturer part number 22807708 maintains top performance when functioning as the Booster, Hydraulic Power Brake Booster unit. The component 22807708 is constructed from durable material and its dimensions span 16.8 x 11.1 x 11.1 inches while weighing 12.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Power Booster. The part 22807708 has available replacement options 20849578, 20985652, 20990926. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.