Make sure this part fits

GM 12463084
Washer Pump, Rear

2000-2005 Buick Park Avenue

Customer Questions & Expert Answers (6)
GM 12463084 Washer Pump, Rear
GM 12463084 Washer Pump, Rear
  • Part Description
    Pump, Rear Window Wiper; Washer Pump Repair Kit; Windshield Washer Pump
  • Position
    Rear
  • Manufacturer
    General Motors
Make sure this part fits
$44.96 MSRP: $80.28
You Save: $35.32 (44%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12463084 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12463084 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Windshield Washer Pump on Buick Park Avenue? Posted by Customer
    A:
    Remove the Washer Pump's service by disconnecting both cruise control and accelerator wires that meet at the solvent reservoir top. Also disconnect the underhood harness from the rear left strut tower bracket and the pump wiring from the front left strut tower bracket. Detach the two top washer solvent container nuts and move the container carefully out of the way to reach the Washer Pump connections. Take the Washer Pump hose off first to drain the washer solvent into a container before disconnecting its power supply connection. Push the Washer Pump onward to break free from the molded tabs on the container before lifting it out of place and disposing of the pump grommet. Press the new Washer Pump grommet into the washer solvent container opening and set the pump down onto it before pushing it straight down to install it properly. Press the pump to lock it onto the molded tabs around the container sides. Finally connect the electrical plug and washer hose to the pump. Fit the washer solvent container onto the two locating studs on the left strut tower and tighten the 2 nuts to 8 n.m (70 lb in). Thread the Washer Pump electrical connector to its front securing point and route the underhood electrical connector to its back anchor on the left strut tower before installing the accelerator and cruise control wires to the washer solvent container top. Put washer solvent into the container and tightly close its lid.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the washer solvent container for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Remove the two nuts securing the washer solvent container, which has a tab in a slot in the vehicle body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    Q:
    What are the final steps to complete the installation for the 2004 Buick Park Avenue? Posted by Customer
    A:
    Reconnect the electrical connectors to the washer solvent container level sensor and washer pump, connect the washer hose to the washer pump, fill the washer solvent container with washer solvent, secure the cap, and verify the operation of the wiper washer system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    Q:
    How do you install the washer pump for the 2000 Buick Park Avenue? Posted by Customer
    A:
    Insert the grommet and washer pump into the container, and secure it with the two nuts, tightening them to 8 N.m (70 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    Q:
    What is the first step to replace the windshield washer pump and reservoir for the 2005 Buick Park Avenue? Posted by Customer
    A:
    Disconnect the electrical connector from the washer pump and the level sensor of the washer solvent container.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Washer Pump, Rear 12463084 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12463084 Washer Pump, Rear is available in the market under the name GM Washer Pump. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12463084 Washer Pump, Rear fits certain Buick Park Avenue models.
The original GM component designated by manufacturer part number 12463084 maintains top performance when functioning as the Pump, Rear Window Wiper; Washer Pump Repair Kit; Windshield Washer Pump unit at its Rear. The component 12463084 is constructed from durable material and its dimensions span 6.2 x 2.0 x 2.0 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pump, Windshield Washer Pump. The part 12463084 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.