Make sure this part fits

GM 10291759
Emblem

1997-2013 GM

Customer Questions & Expert Answers (15)
GM 10291759 Emblem
  • Part Description
    Emblem, Radio Auxiliary Speakers
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$6.75 MSRP: $7.95
You Save: $1.20 (16%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10291759
    Part DescriptionEmblem, Radio Auxiliary Speakers
    Item Dimensions2.3 x 1.7 x 1.7 inches
    Item Weight0.30 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerGeneral Motors
    SKU10291759
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac XLRBase, Platinum, V8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    1997-2013 Chevrolet Corvette427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Z06, Z06 Carbon, ZR18 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 10291759 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10291759 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tool should be used to remove the emblem/nameplate for the 2009 Cadillac XLR? Posted by Customer
    A:
    A plastic, flat-bladed tool should be used to carefully remove the emblem/nameplate from the panel surface.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the area be prepared before installation for the 2005 Cadillac XLR? Posted by Customer
    A:
    Clean the area with a lint-free cloth and Varnish Makers and Painters (VMP) naphtha or a 50/50 mixture of isopropyl alcohol and water, then dry thoroughly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the emblem/nameplate be heated for the 2004 Cadillac XLR? Posted by Customer
    A:
    Heat the emblem/nameplate using a J 25070 in a circular motion for about 30 seconds, holding it approximately 152 mm (6 in) from the surface.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the area be prepared before installation for the 2006 Cadillac XLR? Posted by Customer
    A:
    Clean the area with a lint-free cloth and Varnish Makers and Painters (VMP) naphtha or a 50/50 mixture of isopropyl alcohol and water, then dry thoroughly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done before applying the emblem/nameplate for the 2007 Cadillac XLR? Posted by Customer
    A:
    Remove the protective liner from the back and, if necessary, heat the mounting surface to approximately 27-41°C (80-105°F).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the final step after positioning the emblem/nameplate for the 2007 Cadillac XLR? Posted by Customer
    A:
    Press it firmly against the mounting surface, applying equal pressure to ensure a uniform bond, and then remove the protective tape from the mounting surface.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the emblem/nameplate be heated for the 2008 Cadillac XLR? Posted by Customer
    A:
    Use a J 25070 (Heat Gun) in a circular motion for about 30 seconds, holding it approximately 152 mm (6 in) from the surface.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How do you position the new emblem during installation for the 2000 Chevrolet Corvette? Posted by Customer
    A:
    Peel the protective liner from the adhesive on the back of the emblem and position it centered to the centerline of the vehicle, 37 mm (1.5 in) forward of the rear edge of the lift window panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What are the dimensions for the 50th Anniversary emblem/nameplate placement for the 2004 Chevrolet Corvette? Posted by Customer
    A:
    162 mm (6.375 in) from the top edge to the top and 105 mm (4.125 in) from the top edge to the bottom.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the first step to replace the emblem on the rear lift window panel for the 2004 Chevrolet Corvette? Posted by Customer
    A:
    Protect the mounting surface with tape and use tape for alignment marks during installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be avoided when handling the emblem/nameplate for the 2002 Chevrolet Corvette? Posted by Customer
    A:
    Avoid touching the adhesive backing on the emblem/nameplate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be ensured about the environment during installation for the 2001 Chevrolet Corvette? Posted by Customer
    A:
    The environment should be free from dust, and the area should be cleaned with a lint-free cloth and the same cleaning solution, then dried thoroughly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be avoided when installing the emblem/nameplate for the 2003 Chevrolet Corvette? Posted by Customer
    A:
    Avoid touching the adhesive backing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the emblem/nameplate be positioned and pressed for the 2002 Chevrolet Corvette? Posted by Customer
    A:
    Position it according to the location marks and press it firmly against the mounting surface, applying equal pressure to ensure a uniform bond.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 10291759, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 10291759 Emblem. It is sometimes referred to as GM Emblem. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 10291759 Emblem. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery