Make sure this part fits

GM 25655473
Coil Spring, Rear

1997-2005 GM

Customer Questions & Expert Answers (11)
GM 25655473 Coil Spring, Rear
  • Part Description
    Spring, Rear Spring; Coil Spring Set; Coil Springs
  • Position
    Rear
  • Replaces
    25633131, 25693160
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25655473
    Part DescriptionSpring, Rear Spring; Coil Spring Set; Coil Springs
    Other NamesSpring
    Item Dimensions13.3 x 4.5 x 4.5 inches
    Item Weight5.80 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces25633131, 25693160
    Require Quantity2
    ManufacturerGeneral Motors
    SKU25655473
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    1999 Buick RivieraBase6 Cyl 3.8 L GAS
    1998-2004 Cadillac SevilleSLS, STS8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25655473 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25655473 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you ensure the strut shaft is properly aligned during installation for the 2003 Buick Park Avenue? Posted by Customer
    A:
    Insert the Alignment Rod (J 34013-38) into the strut guide strut shaft and turn the compressor screw clockwise while guiding the rod to the center strut shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be installed after the strut shaft threads are visible for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Install the strut washer and retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the first step in servicing the suspension strut for the 2005 Buick Park Avenue? Posted by Customer
    A:
    Remove the strut from the vehicle and install it in the Strut Spring Compressor (J 45400).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    How do you guide the strut shaft during installation for the 2000 Buick Park Avenue? Posted by Customer
    A:
    Insert the Alignment Rod (J34013-38) into the strut guide strut shaft, then turn the compressor screw clockwise while guiding the rod to the center strut shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the next step after removing the bolts and nut for the 2005 Buick Park Avenue? Posted by Customer
    A:
    Slowly lower the lower control arm until it rests on the support assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the final step in securing the strut for the 2002 Cadillac Seville? Posted by Customer
    A:
    Install the washer, remove the Damper Rod Clamp (J34013-20) from the strut shaft, and tighten the strut mount nut to 75 Nm (55 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What tool is used to separate the adjustment link from the lower control arm for the 2002 Cadillac Seville? Posted by Customer
    A:
    Use the Universal Steering Linkage Puller (J24319-B).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be done after securing the strut for the 2000 Cadillac Seville? Posted by Customer
    A:
    Finally, remove the strut from the compressor and install it back onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What follows after placing the upper insulator for the 2004 Buick Park Avenue? Posted by Customer
    A:
    Place the lower insulator in the control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    How should the spring be positioned during installation for the 2001 Cadillac Seville? Posted by Customer
    A:
    Ensure the tab on the upper spring seat faces inward and that the bearing is properly installed if removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25655473, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25655473 Coil Spring, Rear. It is sometimes referred to as GM Coil Springs. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25655473 Coil Spring, Rear. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery