Make sure this part fits

GM 25655478
Coil Spring, Rear

1995-2005 GM

Customer Questions & Expert Answers (13)
GM 25655478 Coil Spring, Rear
  • Part Description
    Spring, Rear; Coil Springs
  • Position
    Rear
  • Replaces
    25693162
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    1997-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    1995-1997 Buick RivieraBase6 Cyl 3.8 L GAS
    2001-2003, 1995-1999 Oldsmobile AuroraBase6 Cyl 3.5 L GAS, 8 Cyl 4.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25655478 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25655478 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after attaching the adjustment link for the 2004 Buick Park Avenue? Posted by Customer
    A:
    Reinstall the tire and wheel before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should you do to prevent the strut shaft from turning while removing the nut for the 2000 Buick LeSabre? Posted by Customer
    A:
    Use a socket to prevent the strut shaft from turning while removing the 24 mm strut shaft nut with a 24 mm wrench.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the first step to replace the coil spring for the 2005 Buick LeSabre? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be reconnected to the shock absorber for the 2002 Buick LeSabre? Posted by Customer
    A:
    Reconnect the automatic level control air tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What tools are required to service and repair the suspension strut for the 2005 Buick Park Avenue? Posted by Customer
    A:
    Strut Rod Nut Socket (J 42991) and Strut Spring Compressor (J 45400).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What tools are needed to service and repair the suspension strut for the 2000 Buick Park Avenue? Posted by Customer
    A:
    Holding Fixture (J3289-20), Strut Compressor (J34013-B), and Alignment Rod (J34013-38).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    How do you begin compressing the spring on the strut for the 2004 Buick LeSabre? Posted by Customer
    A:
    Install the strut into the Strut Compressor (J34013-B) and turn the compressor forcing screw until the spring compresses slightly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    How do you compress the coil spring for the 2005 Buick LeSabre? Posted by Customer
    A:
    Turn the spring compressor forcing screw until the coil spring is compressed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should you do after positioning the spring over the strut for the 2001 Buick LeSabre? Posted by Customer
    A:
    Move the assembly upright in the strut compressor and install the upper locking pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the first step in the installation process for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Place the strut in the Strut Compressor (J 34013-B) with the Damper Rod Clamp (J 34013-20) clamped on the strut shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    How do you guide the strut shaft out of the assembly for the 2003 Buick Park Avenue? Posted by Customer
    A:
    Install the Alignment Rod (J 34013-38) to guide the strut shaft out, then loosen the compressor screw while guiding the strut shaft out until both the strut and spring can be removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    How do you remove the spring for the 2005 Buick Park Avenue? Posted by Customer
    A:
    Use a pry bar to remove the spring along with the lower spring insulator, then pull downward to remove the upper insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Coil Spring, Rear 25655478 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25655478 Coil Spring, Rear is available in the market under the name GM Coil Springs. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25655478 Coil Spring, Rear fits certain Buick Riviera, LeSabre, Park Avenue models, as well as Oldsmobile Aurora models.
The original GM component designated by manufacturer part number 25655478 maintains top performance when functioning as the Spring, Rear; Coil Springs unit at its Rear. The component 25655478 is constructed from durable material and its dimensions span 11.6 x 7.5 x 7.2 inches while weighing 5.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Spring; Spring, Rear Spring. The part 25655478 has available replacement options 25693162. Each vehicle needs 2 units of the part marked as SKU 25655478. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.