Make sure this part fits

GM 91177421
Front Crank Seal

1999-2004 Chevrolet Tracker

Customer Questions & Expert Answers (7)
GM 91177421 Front Crank Seal
  • Part Description
    Seal, Engine Front Cover & Crankshaft Seal; Timing Cover Seal
  • Position
    Front
  • Replaces
    91174333
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number91177421
    Part DescriptionSeal, Engine Front Cover & Crankshaft Seal; Timing Cover Seal
    Other NamesCrankshaft Pulley Seal; Crankshaft Seal
    Item Dimensions4.2 x 4.2 x 0.3 inches
    Item Weight0.40 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces91174333
    ManufacturerGeneral Motors
    SKU91177421
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2004 Chevrolet TrackerBase, LSi, LT, ZR24 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
  • Customer Questions & Expert Answers

    Q:
    Hey, is 91177421 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 91177421 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the front crankshaft seal on Chevrolet Tracker? Posted by Customer
    A:
    The front Crankshaft Seal repair process requires the first step to separate the negative Battery Cable. Start the task by removing both the Crankshaft Pulley and the Timing Belt. A screwdriver should be used to pull the crankshaft front oil seal out. Before installing the new crankshaft front oil seal you must apply chassis grease gm p/n 1051344 that is equivalent to seal it. Use a hammer to tap the oil seal gently until it lies perfectly flat beside the crankshaft front oil seal retainer edge. Put the Timing Belt along with the Crankshaft Pulley back into place after finishing the installation. After connecting the negative Battery Cable users must tighten the bolt to 15 nm (11 ft. Lbs.) before starting the engine.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the crankshaft rear oil seal and housing for the 2002 Chevrolet Tracker? Posted by Customer
    A:
    First, remove the engine oil pan and the flywheel from the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What tool is used to ensure the crankshaft front oil seal is properly seated for the 2004 Chevrolet Tracker? Posted by Customer
    A:
    Use a hammer and an appropriate driver to lightly tap the crankshaft front oil seal into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the final step after installing the oil seal for the 2000 Chevrolet Tracker? Posted by Customer
    A:
    Reinstall the crankshaft pulley.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should be done after removing the engine oil pan and flywheel for the 2001 Chevrolet Tracker? Posted by Customer
    A:
    Take out the 5 rear main oil seal bolts, followed by the rear main oil seal housing and gasket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How should the flywheel be removed from the crankshaft for the 2003 Chevrolet Tracker? Posted by Customer
    A:
    Remove the flywheel from the crankshaft while ensuring to protect the crankshaft from damage by wrapping the tip of the screwdriver with tape.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 91177421, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 91177421 Front Crank Seal. It is sometimes referred to as GM Crankshaft Seal. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 91177421 Front Crank Seal. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery