Make sure this part fits

GM 10323364
Inner Weatherstrip, Rear

2002-2007 Buick Rendezvous

Customer Questions & Expert Answers (8)
GM 10323364 Inner Weatherstrip, Rear
  • Part Description
    Sealing Strip, Rear Side Door Window Glass Running (Outer & Inner); Weatherstrip
  • Position
    Rear
  • Replaces
    10422085
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10323364 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10323364 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed after lowering the window for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Remove the trim panel from the side front door (Aztek or Rendezvous) and then take out the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be noted when installing the new liftgate weatherstrip for the 2004 Buick Rendezvous? Posted by Customer
    A:
    The new weatherstrip contains mastic/sealer/glue, so do not use weatherstrip adhesive; however, if reusing the weatherstrip, apply adhesive.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the rear pillar auxiliary weatherstrip for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Open both the front and rear doors to remove the center pillar auxiliary weatherstrip with the same tool (J 38778).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear door weatherstrip for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Open the rear door and remove the rear door sill plates.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the new weatherstrip be pressed in for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Press it in a clockwise direction until fully seated, ensuring that the joint butt ends have no gap and are located in the center of the rocker panel area.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be reinstalled after the weatherstrip installation for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Reinstall the door sill plates, the windshield garnish molding, the upper center pillar trim panel, and the center lower trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Reinstall the rear door sill plates and close the rear door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Inner Weatherstrip, Rear 10323364 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10323364 Inner Weatherstrip, Rear is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10323364 Inner Weatherstrip, Rear fits certain Buick Rendezvous models.
The original GM component designated by manufacturer part number 10323364 maintains top performance when functioning as the Sealing Strip, Rear Side Door Window Glass Running (Outer & Inner); Weatherstrip unit at its Rear. The component 10323364 is constructed from durable material and its dimensions span 29.4 x 1.0 x 1.0 inches while weighing 1.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 10323364 has available replacement options 10422085. Each vehicle needs 2 units of the part marked as SKU 10323364. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.