Make sure this part fits

GM 94857281
Cruise Servo

1998-2002 Chevrolet Prizm

Customer Questions & Expert Answers (4)
GM 94857281 Cruise Servo
  • Part Description
    Servo, Cruise Control; Cruise Control Servo
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2002 Chevrolet PrizmBase, LSi4 Cyl 1.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Hey, is 94857281 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 94857281 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the cruise control servo on Chevrolet Prizm? Posted by Customer
    A:
    To service and repair the Cruise Control Servo start by removing the Cruise Control Servo cover then seizing the accelerator control cable locknut. Next, remove the Cruise Control Servo cable bracket screw, Cruise Control Servo cable and accelerator control cable away from the Cruise Control Servo. Disengage the Cruise Control Servo electrical connection and unbolt the 3 Cruise Control Servo attachment bolts while removing the Cruise Control Servo and attached bracket from the vehicle. Subsequently, remove the four screws that came off the cruise control bracket so that the Cruise Control Servo can come out. For installation, position the Cruise Control Servo to the cruise control bracket, and install using the four screws, referring to the fastener notice. Replace the Cruise Control Servo and bracket into the vehicle and secure with the three bolts and tighten the same to 10 n.m (89 lb in). Reconnect the Cruise Control Servo electrical connector then mount the Cruise Control Servo cable to the servo lever and bracket and tighten the cable bracket with one screw. Mount the accelerator control cable to the servo lever bracket and adjust the cable adjusting locknut to allow slight freedom of movement between the accelerator control cable and servo lever before tightening the accelerator cable locknut to 8 n. M (71.this shall be done whether it is pre- or post-installation. Lastly, reinstall the Cruise Control Servo cover.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the cruise control servo on Chevrolet Prizm? Posted by Customer
    A:
    To replace the Cruise Control Servo first you should remove the Cruise Control Servo cover, also remove the accelerator control locknut and loosen it. Next, remove the Cruise Control Servo cable bracket screw, Cruise Control Servo cable, and accelerator control cable from Cruise Control Servo, and take off the Cruise Control Servo electrical connector . Pull out the three Cruise Control Servo mounting bolts, and remove the Cruise Control Servo with the bracket included. After locating the cruise control bracket, remove the four screws and the servo of the cruise control. For installation, secure the Cruise Control Servo by mounting it on the cruise control bracket with four screws, with the proper fastener notice in service precautions. Put the Cruise Control Servo and bracket back onto the vehicle and secure them with the three bolts and tighten to 10 n.m (89 lb in). Connect the Cruise Control Servo electrical connector, and then install the Cruise Control Servo cable onto the servo lever and bracket and fasten the cable bracket using one screw. Mount the accelerator control cable onto the servo lever and bracket, adjusting the cable adjusting locknut for slight freedom of moveable between accelerator control cable and the servo lever before fixations the accelerator cable locknut with tightening it to 8 n.m (71 lb in). Finally, but not less important, reinstall the Cruise Control Servo cover.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2002 Chevrolet Prizm? Posted by Customer
    A:
    Finally, reinstall the cruise control servo cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Cruise Control Servo
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Cruise Servo 94857281 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 94857281 Cruise Servo is available in the market under the name GM Cruise Control Servo. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 94857281 Cruise Servo fits certain Chevrolet Prizm models.
The original GM component designated by manufacturer part number 94857281 maintains top performance when functioning as the Servo, Cruise Control; Cruise Control Servo unit. The component 94857281 is constructed from durable material and its dimensions span 10.7 x 10.0 x 7.0 inches while weighing 3.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Servo. The part 94857281 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.