OEM 2002 Chevrolet Prizm Cruise Control Servo

2002 Chevrolet Prizm Cruise Control Servo Parts Questions & Experts Answers

• Q: How to service and repair the cruise control servo on 2002 Chevrolet Prizm?

  A: To service and repair the Cruise Control Servo, remove the Cruise Control Servo cover and loosen the accelerator control cable locknut. Then remove the Cruise Control Servo cable bracket screw, Cruise Control Servo cable, and accelerator control cable from the Cruise Control Servo, and then remove the Cruise Control Servo electrical connector. Balb those three Cruise Control Servo mounting bolts and remove Cruise Control Servo including the bracketl. Remove the four screws and the Cruise Control Servo from the cruise control bracket. For installation, tighten the Cruise Control Servo to the cruise control bracket by using the four screws while adhering to the fastener notice in service precautions. Put the Cruise Control Servo along with bracket back into the vehicle and fasten with three bolts and then tighten to 10 n.m (89 lb in). Reconnect the Cruise Control Servo electrical connector , then install the Cruise Control Servo cable to the servo lever and bracket,, there the cable bracket which you are to be secured with one screw. Securely install the accelerator control cable to the servo lever and bracket, by adjusting the cable adjusting locknut for slight freedom of movement between the accelerator control cable and the servo lever before locking the accelerator cable lock nut and tighten to 8 n.m (71 lb in). Lastly, replace the Cruise Control Servo cover.