Make sure this part fits

GM 89047676
Shoes

Name: GM 89047676
Brand: GM
SKU: 89047676
Price: 22.40 USD
Availability: Discontinued

2004-2011 GM

Customer Questions & Expert Answers (9)

Part Description
Shoe Kit, Brake; Parking Brake Shoe
Position
Rear
Manufacturer
General Motors

Make sure this part fits

$22.40 MSRP: $40.00

You Save: $17.60 (44%)

Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

Product Specifications
Vehicle Fitment
Customer Questions & Expert Answers

Product Specifications

Brand	Genuine GM
Manufacturer Part Number	89047676
Part Description	Shoe Kit, Brake; Parking Brake Shoe
Item Dimensions	14.3 x 14.4 x 6.2 inches
Item Weight	3.30 Pounds
Position	Rear
Condition	New
Fitment Type	Direct Replacement
Require Quantity	2
Manufacturer	General Motors
SKU	89047676
Warranty	This genuine GM part is guaranteed by GM's factory warranty.
Shipping & Return	Shipping Policy Return Policy

Warning: California's Proposition 65

Vehicle Fitment

Year Make Model	Trim	Engine
2004-2007 Cadillac CTS	Base, V	6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
2004-2009 Cadillac SRX	Base	6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
2005-2011 Cadillac STS	Base, Platinum, V	6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

Customer Questions & Expert Answers
Q:
Is 89047676 compatible with my car? Posted by ChevyPartsGiant Specialist
A:
Please Select Your Vehicle model to see if part number 89047676 is suitable before ordering.
Posted by ChevyPartsGiant Specialist
Q:
How to replace the Parking Brake Shoe on Cadillac CTS? Posted by Customer
A:
A Wheel Bearing along with hub assembly must be removed before beginning Parking Brake Shoe replacement. Adjust the parking brake adjusting nut clockwise by a quarter-turn to remove all park brake shoe adjustment from the system. Start by extracting the Parking Brake Shoe retaining spring and afterward detach the park brake shoe assembly using proper grasp and slight shoe spread before pulling it from the actuator assembly. Start by installing the park brake shoe assembly in its normal manner before continuing with the installation of the Parking Brake Shoe retaining spring. Reset the Wheel Bearing along with the hub assembly before you adjust the park brake shoe clearance before lowering the entire vehicle.
Posted by ChevyPartsGiant Specialist
Q:
How to replace the Parking Brake Shoe on Cadillac STS? Posted by Customer
A:
The first step when replacing parking brake shoes requires removal of Wheel Bearing and hub assembly. Continue rotating the parking brake adjusting nut until you remove all the needed park brake shoe adjustment. The process begins by removing the Parking Brake Shoe retaining spring after which you can take out the park brake shoe assembly through spreading the shoe while pulling it from the actuator. The first step is to put the park brake shoe retaining spring in place subsequently install the park brake shoe assembly. Put back the Wheel Bearing and hub assembly afterward you must adjust the Parking Brake Shoe-to-drum clearance before you end with lowering the vehicle.
Posted by ChevyPartsGiant Specialist
Q:
How to replace the Parking Brake Shoe on Cadillac SRX? Posted by Customer
A:
The replacement of parking brake shoes begins with removal of the Wheel Bearing and hub assembly. Adjustment of the parking brake adjusting nut should continue until all remaining adjustment has been removed. First detach the Parking Brake Shoe retaining spring before removing the assembly by spread the shoe lightly while pulling it from the actuator assembly. The first step for installation involves putting the park brake shoe assembly in position while spreading it slightly for pulling over the actuator assembly and finally installing the Parking Brake Shoe retaining spring . Place the Wheel Bearing and hub assembly over the hub but first step through an adjustment of the Parking Brake Shoe-to-drum clearance before lowering the vehicle.
Posted by ChevyPartsGiant Specialist
Q:
How to Properly Adjust and Replace the Parking Brake Shoe on Cadillac SRX? Posted by Customer
A:
Replacement of the Parking Brake Shoe begins with the removal of the Wheel Bearing along with its hub assembly. The parking brake adjusting nut should be rotated for all necessary shoe adjustment to be drained away. The first step removes the Parking Brake Shoe retaining spring then the park brake shoe assembly becomes removable by grasping at the shoe while spreading it lightly while pulling away from the actuator assembly. First install the park brake shoe assembly by following the same steps followed by mounting the Parking Brake Shoe retaining spring. Put back the Wheel Bearing and hub assembly before setting the Parking Brake Shoe-to-drum clearance through installation steps. Finally, lower the vehicle.
Posted by ChevyPartsGiant Specialist
Q:
How to properly service and replace the Parking Brake Shoe on Cadillac CTS? Posted by Customer
A:
Before installing new parking brake shoes the Wheel Bearing together with hub assembly must be removed. Screw the parking brake adjusting nut by until all park brake shoe adjustment has been removed. The Parking Brake Shoe retaining spring needs to be taken out first before pulling the shoe assembly from the actuator by grasping it and spreading it slightly. Start with the park brake shoe assembly installation which requires same-step procedure followed by Parking Brake Shoe retaining spring installation. Restore the Wheel Bearing together with hub assembly before setting the Parking Brake Shoe-to-drum clearance then proceed to lower the vehicle.
Posted by ChevyPartsGiant Specialist
Q:
What should be adjusted after reinstalling the wheel bearing and hub assembly for the 2006 Cadillac SRX? Posted by Customer
A:
Adjust the parking brake shoe-to-drum clearance.
Posted by ChevyPartsGiant Specialist
See expert answers on similar Parking Brake Shoe
Q:
What should be adjusted after reinstalling the wheel bearing and hub assembly for the 2006 Cadillac STS? Posted by Customer
A:
Adjust the parking brake shoe-to-drum clearance.
Posted by ChevyPartsGiant Specialist
See expert answers on similar Parking Brake Shoe
Q:
What is the first step in the installation process for the 2009 Cadillac STS? Posted by Customer
A:
Install the park brake shoe assembly in the same manner as it was removed.
Posted by ChevyPartsGiant Specialist
See expert answers on similar Parking Brake Shoe
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 89047676, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 89047676 Shoes. It is sometimes referred to as GM Brake Shoe, GM Parking Brake Shoe. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 89047676 Shoes. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.