Make sure this part fits

GM 94857871
Steering Wheel, Charcoal

1998-2002 Chevrolet Prizm

Customer Questions & Expert Answers (5)
GM 94857871 Steering Wheel, Charcoal
  • Part Description
    Wheel
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2002 Chevrolet PrizmBase, LSi4 Cyl 1.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Hey, is 94857871 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 94857871 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What Tools Are Required to Service and Repair the Steering Column and Steering Wheel with Tilt on Chevrolet Prizm? Posted by Customer
    A:
    The following tools are essential to perform service or repair of a steering wheel and column with tilt operations: Steering Wheel Puller (J 1859-A). Start by turning off the SIR system and positioning the vehicle's front wheels straight ahead while locking the steering column in its position to avoid alignment issues and SIR coil assembly damage. Start by disconnecting the inflatable restraint steering wheel module and then disconnect the horn electrical connector followed by cruise control electrical connector if your vehicle has it. Use a marker to place matchmarks on both the steering wheel and main shaft before extracting the steering wheel retaining nut. The J1859-A bolts should not exceed 13 mm (0.5 inch) depth when installing the screws to protect against SRS coil assembly damage. The Steering Wheel Puller (J 1859-A) should be used to eliminate the steering wheel. First line up the matchmarks before mounting the steering wheel and tightening the retaining nut to a torque of 34 Nm (25 ft. lbs.). Reattach the horn electrical connector followed by the cruise control electrical connector if installed before you can install the inflatable restraint steering wheel module. Enable the SIR system after completing the wheel alignment step.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the steering wheel while ensuring proper alignment and safety on Chevrolet Prizm? Posted by Customer
    A:
    To replace the Steering Wheel, first you need to de-energize the sir system and have the front wheels in the straight ahead capacity with the Steering Column locked so improper alignment and sir coil assembly redoes not happen. Take off the inflatable restraint Steering Wheel module and disconnect the horn electrical connector, and the cruise control electrical connector if equipped. Take out the Steering Wheel retaining nut and apply matchmarks to the Steering Wheel and main shaft. To pull the Steering Wheel gently, proceed to use the j 1859-a Steering Wheel puller (J 1859-A) in order not to hit the Steering Column shaft with a hammer and then damage its rigidity. For installation, match the marks and that's it for the Steering Wheel and tightening is secured with retaining nut: tightening to 34 nm (25 ft. Lbs.). Plug the horn electrical connector and the cruise control electrical connector back if available, plug the inflatable restraint Steering Wheel module, check if the Steering Wheel is centered and lastly enable sir system.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step in servicing and repairing the steering wheel and column for the 2000 Chevrolet Prizm? Posted by Customer
    A:
    Begin by disabling the SIR system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Wheel
    Q:
    What is the final step after reassembling the components for the 2001 Chevrolet Prizm? Posted by Customer
    A:
    Ensure the steering wheel is centered and enable the SIR system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Wheel
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Steering Wheel, Charcoal 94857871 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 94857871 Steering Wheel, Charcoal is available in the market under the name GM Steering Wheel. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 94857871 Steering Wheel, Charcoal fits certain Chevrolet Prizm models.
The original GM component designated by manufacturer part number 94857871 maintains top performance when functioning as the Wheel unit. The component 94857871 is constructed from durable material. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Wheel, Steering. The part 94857871 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.