Make sure this part fits

GM 16622669
Striker

1992-2005 GM

Customer Questions & Expert Answers (14)
GM 16622669 Striker
  • Part Description
    Striker, Door Lock Striker
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number16622669
    Part DescriptionStriker, Door Lock Striker
    Item Dimensions3.2 x 2.5 x 2.4 inches
    Item Weight0.60 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU16622669
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1992-2005 Chevrolet AstroBase, CL, CS, LS, LT6 Cyl 4.3 L GAS
    1992-2005 GMC SafariBase, GT, SL, SLE, SLT, SLX6 Cyl 4.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 16622669 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 16622669 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the shoulder belt guide bolt for the 2002 Chevrolet Astro? Posted by Customer
    A:
    Pull the trim panel forward to access the striker bolt nut and remove the screw at the bottom of the door pillar trim.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    How do you install the new striker for the 2003 Chevrolet Astro? Posted by Customer
    A:
    Attach the new striker to the door, ensuring the narrow part on the wedge plate points toward the rear of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the final step in the process for the 2000 Chevrolet Astro? Posted by Customer
    A:
    Finally, install the bolts that retain the lock striker and tighten them to 8 N.m (71 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the torque specification for tightening the nuts to the striker for the 2001 Chevrolet Astro? Posted by Customer
    A:
    Tighten the nuts to the striker to 30 Nm (22 lb.ft.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the left rear door striker for the 2005 Chevrolet Astro? Posted by Customer
    A:
    First, remove the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the final step after installing the striker for the 2002 GMC Safari? Posted by Customer
    A:
    Reinstall the right hand body side trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    How do you install the door striker for the 2005 Chevrolet Astro? Posted by Customer
    A:
    Using the Door Lock Striker and Seat Belt Torx Wrench (J 29843-9), install the door striker while holding the nut to prevent it from falling into the body pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What components need to be removed after the rear storage compartment bolts for the 2004 Chevrolet Astro? Posted by Customer
    A:
    Remove the bolts, the striker, the spacer, the washer, and the nut plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step in the installation process for the 2003 GMC Safari? Posted by Customer
    A:
    Attach the spacer and insulator to the striker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the torque specification for tightening the door striker for the 2001 GMC Safari? Posted by Customer
    A:
    Tighten the door striker to 67 Nm (49 lb.ft.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the sliding door rear striker for the 2005 GMC Safari? Posted by Customer
    A:
    Remove the right hand body side trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step in the installation process for the 2000 GMC Safari? Posted by Customer
    A:
    First, install the spacer and insulator onto the striker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the left rear door striker for the 2000 GMC Safari? Posted by Customer
    A:
    Begin by removing the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 16622669, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 16622669 Striker. It is sometimes referred to as GM Door Striker. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 16622669 Striker. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery