Make sure this part fits

GM 12570585
Tube

2004-2010 GM

Customer Questions & Expert Answers (13)
GM 12570585 Tube
GM 12570585 Tube
  • Part Description
    Tube, Oil Level Indicator; Oil Dipstick Tube
  • Manufacturer
    General Motors
Make sure this part fits
$17.33 MSRP: $22.86
You Save: $5.53 (25%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase8 Cyl 4.6 L GAS
    2005-2010 Cadillac STSBase, Platinum8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12570585 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12570585 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Dipstick Tube on Cadillac SRX? Posted by Customer
    A:
    Begin work by turning off ignition then remove the oil level indicator from its position in the oil level indicator tube. Start the replacement process by removing the oil level indicator tube bolt after which you can raise the vehicle through a proper lifting technique. The maintenance starts with raising the vehicle before resetting the Knock Sensor and heat shield clip on the oil level indicator tube. Observation of secondary heat shield spatial positioning should be recorded before extracting the oil level indicator tube through the Exhaust Manifold opening. The technicians should dispose of the original oil level indicator tube seal when they only need to replace the seal. You should install the secondary heat shield according to the removal steps on the oil level indicator tube. Complete the installation by putting back the oil level indicator and tube while raising the vehicle before reinstalling the Knock Sensor. Attach the heat shield clip to the oil level indicator tube in the same configuration required for removal and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the sight shield for the 2005 Cadillac STS? Posted by Customer
    A:
    Take out the oil level indicator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What should be done after removing the sight shield for the 2006 Cadillac STS? Posted by Customer
    A:
    Take out the oil level indicator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What should be noted when lowering for the 2009 Cadillac SRX? Posted by Customer
    A:
    Note the location and orientation of the secondary (small square) heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What should be done after removing the front compartment sight shield for the 2009 Cadillac STS? Posted by Customer
    A:
    Take out the oil level indicator from the oil level indicator tube and remove the oil level indicator tube bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What is the first step to replace the oil level indicator and tube for the 2005 Cadillac SRX? Posted by Customer
    A:
    Turn the ignition OFF and remove the oil level indicator from the oil level indicator tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What is the first step to service and repair the Engine Oil Dip Stick and Dip Stick Tube for the 2007 Cadillac SRX? Posted by Customer
    A:
    Begin by removing the oil level indicator and loosening the oil level indicator tube bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What should be done if only the oil level indicator tube seal is being replaced for the 2006 Cadillac SRX? Posted by Customer
    A:
    Discard the old seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What is the next step after removing the tube bolt for the 2008 Cadillac STS? Posted by Customer
    A:
    Remove the engine splash shield and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What is the next step after detaching the oil level indicator for the 2007 Cadillac STS? Posted by Customer
    A:
    Raise the vehicle and take out the knock sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    How is the oil level indicator tube removed for the 2009 Cadillac STS? Posted by Customer
    A:
    Remove the oil level indicator tube through the exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    How do you extract the oil level indicator tube for the 2010 Cadillac STS? Posted by Customer
    A:
    Carefully extract the oil level indicator tube up through the exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Tube 12570585 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12570585 Tube is available in the market under the name GM Dipstick Tube. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12570585 Tube fits certain Cadillac SRX, STS models.
The original GM component designated by manufacturer part number 12570585 maintains top performance when functioning as the Tube, Oil Level Indicator; Oil Dipstick Tube unit. The component 12570585 is constructed from durable material and its dimensions span 18.9 x 7.4 x 5.1 inches while weighing 4.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Tube, Engine Oil Level. The part 12570585 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.