OEM 2000 Buick Regal Power Steering Pump

2000 Buick Regal Power Steering Pump Parts and Q&A

• Q: How to replace the power steering pump on 2000 Buick Regal?

  A: Vehicle maintenance starts with accessory Drive Belt removal before vehicle lifting and supporting while removing tire and wheel assembly. The vehicle requires a drain pan which should be placed below it while detaching the power steering pressure line and return hose from the pump. After removing the mounting bolts proceed with removing the Power Steering Pump assembly from the vehicle. You should remove the power steering pulley together with the reservoir from the pump assembly. Installation of the power steering system begins with reservoir attachment to the pump and completion using the power steering pulley. After installation of the Power Steering Pump reinstall its mounting bolts and apply torque force at 34 nm (25 ft. Lbs.). You should connect the power steering pressure line as well as the return hose before reattaching the tire and wheel assembly. You should lower the vehicle before putting on the accessory Drive Belt. Add power steering system fluid before removing air from the system then examine for leakage before taking out the drain pan located underneath the car.