How to service the Sway Bar Link on 2000 Cadillac Catera?

A vehicle service on the Sway Bar Link needs to begin with vehicle elevation and support. Begin the Sway Bar Link service procedure by uninstalling the front wheel assembly. You should first use a 17 mm wrench for sway bar shaft counter hold if necessary when removing the Sway Bar Link nut from both the sway bar shaft and strut assembly. Remove the Sway Bar Link after performing the previous steps. When installing the Sway Bar Link connect it firstly to the sway bar shaft and secondly to the strut assembly while strictly applying the fastener notice guidelines. Attach the Sway Bar Link nuts while tightening each one to 65 nm (48 ft. Lbs.) using a 17 mm wrench with additional counter hold if provide assistance. The front wheel assembly should then be installed before lowering the vehicle.

OEM 2000 Cadillac Catera Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Links found

View related parts
2000 Cadillac Catera Stabilizer Link Part Number: 90334915
Product Specifications
- Other Name: Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link
- Position: Rear
- Item Weight: 0.90 Pounds
- Item Dimensions: 9.2 x 2.9 x 2.9 inches
- Condition: New
- SKU: 90334915
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Catera Submodels:
- Base, Sport | 6 Cyl 3.0 L GAS
View related parts
2000 Cadillac Catera Stabilizer Link Part Number: 90334916
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
- Position: Rear Passenger Side
- Item Weight: 0.90 Pounds
- Item Dimensions: 9.0 x 1.6 x 1.7 inches
- Condition: New
- SKU: 90334916
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Catera Submodels:
- Base, Sport | 6 Cyl 3.0 L GAS
View related parts
2000 Cadillac Catera Stabilizer Link Part Number: 90445137
Product Specifications
- Other Name: Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link
- Position: Front
- Item Weight: 1.00 Pounds
- Item Dimensions: 11.1 x 2.8 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90445137
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Catera Submodels:
- Base, Sport | 6 Cyl 3.0 L GAS

2000 Cadillac Catera Sway Bar Link

With a comprehensive array of OEM 2000 Cadillac Catera Sway Bar Link, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Cadillac Catera Sway Bar Link are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Cadillac Catera Sway Bar Link Parts and Q&A

Q: How to service the Sway Bar Link on 2000 Cadillac Catera?
A: A vehicle service on the Sway Bar Link needs to begin with vehicle elevation and support. Begin the Sway Bar Link service procedure by uninstalling the front wheel assembly. You should first use a 17 mm wrench for sway bar shaft counter hold if necessary when removing the Sway Bar Link nut from both the sway bar shaft and strut assembly. Remove the Sway Bar Link after performing the previous steps. When installing the Sway Bar Link connect it firstly to the sway bar shaft and secondly to the strut assembly while strictly applying the fastener notice guidelines. Attach the Sway Bar Link nuts while tightening each one to 65 nm (48 ft. Lbs.) using a 17 mm wrench with additional counter hold if provide assistance. The front wheel assembly should then be installed before lowering the vehicle.