OEM 2000 Cadillac Catera Washer Reservoir

2000 Cadillac Catera Parts Questions & Experts Answers

• Q: How to replace the washer reservoir on 2000 Cadillac Catera?

  A: Lift the hood to replace the Washer Reservoir by taking off the air snorkel screw and moving the snorkel out of the way. Turn off and remove these connections on the Washer Pump hose, Washer Pump electrical wires, and level sensor wires before dismantling the reservoir. You must remove the two screws from the reservoir mounts to take the reservoir out. When installing a new reservoir you must move both the Washer Pump and sensor level unit. Begin by installing the Washer Pump and level sensor first before putting in the reservoir itself. Use two screws to fasten the reservoir in place by turning only until they sit flush without destroying the threads. Rejoin the wiring supplies of the level sensor and Washer Pump before attaching the Washer Pump hose to the pump. Install the reservoir filler neck into place while moving the air snorkel back to its mount and fastening its screw before closing the hood.