How to service the PCV Valve on 2000 Chevrolet Camaro?

Start the Positive Crankcase Ventilation Valve service by using fingers to hold down the valve cover and then remove its two retaining bolts. You must first remove the PCV valve cover before proceeding to take out the PCV valve alongside its spring and O-ring component. Reinstall the PCV valve followed by its spring and O-ring in their original position during installation. Readers need to pay attention to the service precaution notice that appears in the Fastener section. You should install the PCV valve cover along with a new gasket if required before you start the hand-driven bolts by two. Secure the two cover retaining bolts at 12 N.m (106 lb in).

OEM 2000 Chevrolet Camaro PCV Valve

Position Crank Ventilation Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 PCV Valve found

View related parts
2000 Chevrolet Camaro PCV Valve Part Number: 25043843
Product Specifications
- Other Name: Valve, PCV; Crankcase Vent Valve; Crankcase; Valve, Engine Crankcase
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.1 x 1.4 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25043843
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Camaro Submodels:
- Base, Berlinetta, LT, RS, RS Heritage Edition, Sport | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS

2000 Chevrolet Camaro PCV Valve

With a comprehensive array of OEM 2000 Chevrolet Camaro PCV Valve, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Camaro PCV Valve are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Camaro PCV Valve Parts and Q&A

Q: How to service the PCV Valve on 2000 Chevrolet Camaro?
A: Start the Positive Crankcase Ventilation Valve service by using fingers to hold down the valve cover and then remove its two retaining bolts. You must first remove the PCV valve cover before proceeding to take out the PCV valve alongside its spring and O-ring component. Reinstall the PCV valve followed by its spring and O-ring in their original position during installation. Readers need to pay attention to the service precaution notice that appears in the Fastener section. You should install the PCV valve cover along with a new gasket if required before you start the hand-driven bolts by two. Secure the two cover retaining bolts at 12 N.m (106 lb in).