OEM 2000 Chevrolet Corvette Rack And Pinion

2000 Chevrolet Corvette Rack And Pinion Parts Questions & Experts Answers

• Q: How to service the Rack and Pinion steering gear on 2000 Chevrolet Corvette?

  A: To service the Rack And Pinion, follow the process of placing a drain pan under the vehicle to drain the power steering fluid. Buttress the vehicle and unplug the tire and wheel assembly. Next, unscrew the Rack And Pinion boots from each side of the power steering rack. Remove the shock dampener from on the inner tie rod assembly on the left side of the rack, by sliding it backward into the rack so as to ensure that the rack of the Rack And Pinion is stationary not to cause any damage to it while pulling off the inner Tie Rod End. To take the inner tie rod out of the rack, take an appropriate size wrench and place it on the teeth of the rack assembly and another wrench on the flats of the inner tie rod housing, rotate the inner tie rod housing counterclockwise until unlocking from the rack. Lastly, clean the old thread locking compound off the threads of the rack and the inner tie rod.