OEM 2000 Chevrolet Impala Tail Light

2000 Chevrolet Impala Tail Light Parts Questions & Experts Answers

• Q: How to remove and install the Tail Light on 2000 Chevrolet Impala?

  A: Begin tail lamp replacement by opening the rear compartment then disconnecting the rear compartment convenience net. The first step involves removing the wingnut then you can pull back the rear compartment trim panel from the taillamp. You need to remove the wingnuts from the taillamp before you can pull the taillamp free from the rear body panel. After removing the electrical connector from the taillamp you should turn the taillamp socket counterclockwise to detach it before removing the bulb from the socket. Turn the sidemarker lamp socket counterclockwise to remove it before taking out the bulb from the socket. Begin bulb installation by putting the bulb into the taillamp socket then into the sidemarker lamp socket. First tighten the sidemarker lamp socket clockwise then install the taillamp socket by doing the same rotation. Begin by installing the taillamp through the rear body panel before attaching it with wingnuts. Next connect the electrical connector to the taillamp. First install the wingnut through the rear compartment trim panel then restore the rear compartment convenience net before finishing with rear compartment closure.