How to service and repair the Brake Pedal Assembly on 2000 Chevrolet K3500?

In order to service and repair the Brake Pedal Assy, unconnect the battery negative cable and deactivate the SIR. To access the required components, remove the electrical connector of the stoplamp switch and remove the required components. When installing, start with the brake pedal, move to the spacer and bushings, the electrical connector should then be reattached and the SIR should be enabled.

OEM 2000 Chevrolet K3500 Brake Pedal

Brake Pedal Pad

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Pedal found

View related parts
2000 Chevrolet K3500 Parking Brake Control Part Number: 15155147
Product Specifications
- Other Name: Lever, Parking Brake Apply; Pedal, Brake
- Replaces: 15986103
- Item Weight: 6.40 Pounds
- Item Dimensions: 3.2 x 15.7 x 13.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15155147
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet K3500 Submodels:
- Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS

2000 Chevrolet K3500 Brake Pedal

With a comprehensive array of OEM 2000 Chevrolet K3500 Brake Pedal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet K3500 Brake Pedal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet K3500 Brake Pedal Parts and Q&A

Q: How to service and repair the Brake Pedal Assembly on 2000 Chevrolet K3500?
A: In order to service and repair the Brake Pedal Assy, unconnect the battery negative cable and deactivate the SIR. To access the required components, remove the electrical connector of the stoplamp switch and remove the required components. When installing, start with the brake pedal, move to the spacer and bushings, the electrical connector should then be reattached and the SIR should be enabled.