How to replace the Shift Cable at the PNP Switch on 2000 Chevrolet Lumina?

The procedure to replace the Shift Cable at the pnp switch begins with removing the automatic transaxle Shift Cable from the wiring harness clip, automatic transaxle shift lever, automatic transaxle Shift Cable bracket then detaching it from the column shift control to pull through the dash from the engine compartment side. To install the automatic transaxle Shift Cable, starting from the engine compartment technicians should guide the cable through the dash before securing it to the automatic transaxle Shift Cable bracket followed by the automatic transaxle shift lever and wiring harness clip and column shift control. Acquire the proper length of automatic transaxle Shift Cable by making necessary adjustments.

OEM 2000 Chevrolet Lumina Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Shift Cable found

View related parts
2000 Chevrolet Lumina Cable
Part Number: 26046375
Product Specifications
- Other Name: Cable, Transmission Shift Brake Interlock; Automatic Transmission Shifter Cable
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.7 x 10.8 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26046375
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Lumina Submodels:
- Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2000 Chevrolet Lumina Shift Cable

With a comprehensive array of OEM 2000 Chevrolet Lumina Shift Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Lumina Shift Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Lumina Parts Questions & Experts Answers

Q: How to replace the Shift Cable at the PNP Switch on 2000 Chevrolet Lumina?
A: The procedure to replace the Shift Cable at the pnp switch begins with removing the automatic transaxle Shift Cable from the wiring harness clip, automatic transaxle shift lever, automatic transaxle Shift Cable bracket then detaching it from the column shift control to pull through the dash from the engine compartment side. To install the automatic transaxle Shift Cable, starting from the engine compartment technicians should guide the cable through the dash before securing it to the automatic transaxle Shift Cable bracket followed by the automatic transaxle shift lever and wiring harness clip and column shift control. Acquire the proper length of automatic transaxle Shift Cable by making necessary adjustments.