OEM 2000 Chevrolet Metro Starter

Starter Ignition
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Starters found

  • 2000 Chevy Metro Starter - 30005925
    2000 Chevy Metro Starter Diagram - 30005925
    View related parts
    Product Specifications
    • Other Name: Starter, Starter Motor
    • Item Weight: 8.30 Pounds
    • Item Dimensions: 8.3 x 6.5 x 4.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 30005925
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2000 Chevrolet Metro Submodels:
    • Base, LSi | 3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS
  • 2000 Chevy Metro Starter - 30005226
    2000 Chevy Metro Starter Diagram - 30005226
    View related parts
    Product Specifications
    • Other Name: Starter, Starter Motor
    • Item Weight: 10.20 Pounds
    • Item Dimensions: 9.4 x 6.3 x 5.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 30005226
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2000 Chevrolet Metro Submodels:
    • Base, LSi | 3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS
  • 2000 Chevy Metro Starter - 30005563
    2000 Chevy Metro Starter Diagram - 30005563
    View related parts
    Product Specifications
    • Other Name: Starter, Starter Motor
    • Item Weight: 9.90 Pounds
    • Item Dimensions: 10.3 x 8.6 x 6.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 30005563
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2000 Chevrolet Metro Submodels:
    • Base, LSi | 3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS

2000 Chevrolet Metro Starter

With a comprehensive array of OEM 2000 Chevrolet Metro Starter, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Metro Starter are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Metro Starter Parts Questions & Experts Answers

  • Q: What tools are required to service and repair the starter motor on 2000 Chevrolet Metro?
    A: The required tools for fixing Starter motors consist of tension scale (J 544-01), dial indicator (J 8001), magnetic base (J 26900-13), vernier caliper (J 26900-5), and digital multimeter (J 39200). First clean all Starter motor components while sanding away burn marks and clearing dirt from the commutator end of the Armature by using #300 or #400 grit sandpaper followed by wiping with a clean cloth. Set the Armature on v-blocks then use the dial indicator (J 8001) along with the magnetic base (J 26900-13) to determine commutator run-out; discard the Armature if it exceeds 0.40 mm (0.016 in). Use the vernier caliper (J 26900-5) to check the commutator outside diameter then replace the Armature if the measurement falls below the specified minimum diameter for automatic or manual transaxle requirements. The Armature needs replacement when commutator insulation depth falls below 0.2 mm (0.008 in). The digital multimeter (J 39200) should be used to check the core to commutator resistance which must be below 5.0 ohms for the Armature to remain in service. Test the commutator segment-to-segment resistance levels until reaching 5.0 ohms and replace the Armature when this value is exceeded. The test for manual transaxle field coils requires measuring resistance between lead wires and the yoke component; replace the yoke if resistance is at 5 ohms or below. The brush requires replacement through vernier caliper (J 26900-5) measurements when its length falls below specification. The digital multimeter (J 39200) should be used to measure resistance between positive and negative brush holders. Replace the brush holder whenever the measured resistance falls below 5.0 ohms. The brush spring tension needs to be checked with j 544-01 tension scale to replace the spring when maintained tension goes below the minimum level. Use the digital multimeter (J 39200) to check the pull-in and hold-in coils resistance of the Starter Solenoid. Replace the solenoid when either resistance passes 5.0 ohms. Check and replace all components of pinion drive lever, overrunning clutch, Armature bushing and bearings when signs of wear or damage emerge. The maintenance process concludes with an evaluation of the internal gear assembly, idle gears, brush springs, brush holder and positive plate insulation before changing all affected components displaying signs of wear or damage.

Related 2000 Chevrolet Metro Parts