How to service the Power Steering Pressure Switch on 2000 Chevrolet Tracker?

Service of the Power Steering Pressure Switch starts by disconnecting its electrical connector from the power steering pressure (PSP) switch. Feed the psp switch electrical connector off the power steering pressure (PSP) switch and then take it out from the steering pump compartment. Place the psp switch into the Power Steering Pump and fasten it with a torque of 27 n.m (20 lb ft). Secure the switch in place before plugging in the psp switch electrical connector while bleaching air from the power steering system.

OEM 2000 Chevrolet Tracker Power Steering Pressure Switch

Power Steering Oil Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Pressure Switch found

View related parts
2000 Chevrolet Tracker Power Steering Pressure Switch
Part Number: 91174759
Product Specifications
- Other Name: Switch, Steering Gear Oil Pressure; Switch, Hydraulic Steering Gear Pressure
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.3 x 4.2 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91174759
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Tracker Submodels:
- Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2000 Chevrolet Tracker Power Steering Pressure Switch

With a comprehensive array of OEM 2000 Chevrolet Tracker Power Steering Pressure Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Tracker Power Steering Pressure Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Tracker Parts Questions & Experts Answers

Q: How to service the Power Steering Pressure Switch on 2000 Chevrolet Tracker?
A: Service of the Power Steering Pressure Switch starts by disconnecting its electrical connector from the power steering pressure (PSP) switch. Feed the psp switch electrical connector off the power steering pressure (PSP) switch and then take it out from the steering pump compartment. Place the psp switch into the Power Steering Pump and fasten it with a torque of 27 n.m (20 lb ft). Secure the switch in place before plugging in the psp switch electrical connector while bleaching air from the power steering system.

Related 2000 Chevrolet Tracker Parts

Alternate Year Models

1999 Chevrolet Tracker Power Steering Pressure Switch 2001 Chevrolet Tracker Power Steering Pressure Switch