OEM 2000 Chevrolet Tracker Power Window Switch

2000 Chevrolet Tracker Parts Questions & Experts Answers

• Q: How to replace the rear door power window switch on 2000 Chevrolet Tracker?

  A: Starting the replacement of the rear door Power Window Switch requires removing both the rear side door inside handle and the screw from the rear side door pull handle. The removal of rear side door trim panel requires gently prying it from the door while disconnecting plastic retainers. The door trim panel must be positioned at the correct location for disconnecting the electrical connector of the rear side window switch. Take out the rear side window switch from the door panel by first removing the door trim panel and then disengaging the four plastic retaining tabs present in the panel. The installation requires the rear side window switch to be positioned inside the rear side door trim panel while engaging all 4 plastic retaining tabs completely. Connect the rear side window switch electrical connector after reinstalling the door trim panel to the rear side door which must have all plastic retainers properly locked into place. Secure the rear side door pull handle by using the screw and reinstall the rear side door inside handle.